and congratulations on your purchase of a new DR 10 HP CHIPPER! We have done our utmost to ensure that your DR 10 HP CHIPPER will be one of the most trouble-free and satisfying pieces of equipment you have ever owned. Please let us know of any questions you may have. We want to answer or correct them as quickly as possible. When you do call, please have your serial number and/or order number handy. For technical assistance, please call Toll-Free 1-800-DR-OWNER (376-9637) and one of our Technical

• ALWAYS OPERATE THE MACHINE FROM THE OPERATOR ZONE (SEE FIGURE 9 ON PAGE 24). NEVER PASS OR STAND ON THE DISCHARGE SIDE OF THE MACHINE WHEN THE ENGINE IS RUNNING OR THE FLYWHEEL IS TURNING. • NEVER TRY TO PICK UP, MOVE, OR TRANSPORT THE MACHINE WHILE THE ENGINE IS RUNNING OR THE FLYWHEEL IS TURNING. • THE MUFFLER AND ENGINE BECOME VERY HOT AND CAN CAUSE A SEVERE BURN; DO NOT TOUCH. • CLEAR THE AREA OF OBJECTS SUCH AS WIRE AND ROPE ETC. INSERTING THESE OBJECTS INTO THE CHIPPER HOPPER COULD DAMAG

See page 40. • Extremely hard knots will not process very well. Short stubs that have not self-fed through the Chipper can be pushed through with the next branch to be chipped. NEVER THROW REMAINING STUBS OR KNOTS INTO THE CHIPPER HOPPER; DAMAGE WILL RESULT. • Cut the material to be chipped into manageable lengths of no more than five or six feet long before chipping them. • Overloading the Chipper Hopper will cause the rotor speed to decrease. If you hear the engine RPM decreasing, stop feeding

Please let us know of any questions you may have. We want to answer them as quickly as possible. When you do call, please have your serial number or order number handy. For technical assistance, please call Toll-Free 1-800-DR-OWNER (376-9637) and one of our Technical Support Representatives will be happy to help you. We also hope to hear from you on how much you like your new helper. In addition, please tell your friends about your new DR 6 -TON ELECTRIC WOOD SPLITTER! Having DR Owners spread th

2015280 and up OM 0308 TABLE OF CONTENTS INTRODUCTION – TO THE PURCHASER..........................................................................................................4 SAFETY PRECAUTIONS.......................................................................................................................................5 Before Operation .................................................................................................................................................5 N

1. Place the chute (item 1) on the discharge hole (item 2) around the DR® SNOW THROWER. 2. Install the three retaining plates (item 3) using the six 1/4" x 1/2" bolts and flange nuts (items 4-5), tighten securely. Verify that the chute turns freely on the collar. Figure 2 DR® SNOW THROWER Safety, Operation & Maintenance Instructions ASSEMBLY & INSTALLATION ! WARNING: Before installing the DR® SNOW THROWER, always bring the DR® ALLTERRAIN ™ MOWER to a complete stop, shut off the engine and remove

! WARNING: Always keep the DR® SNOW THROWER discharge away from people, animals and objects which could be struck by debris. Adjustments Deflector Adjustment Adjust the deflector angle according to the distance the snow must be thrown. To adjust, loosen the knob, adjust to the desired angle then tighten knob securely. Skid Shoe Adjustment (Figures 8 & 9) Adjust skid shoes in order to allow the required clearance (H) between the cutting edge and the surface, by loosening the 5/16" x 5/8" carriage

Where it is possible to throw the snow to the left and right (above), as on a long driveway, it is advantageous to start in the middle. Plow from one end to the other, throwing snow to both sides without changing the direction of the discharge chute. If the snow can only be thrown to one side of the driveway or sidewalk (above), start on the opposite side. At the end of the first pass, rotate the discharge chute 180 degrees for the return pass. At the end of each succeeding pass, rotate the disc

Reference numbers are used in the illustrations. These numbers correspond to those in the “Reference Number” (REF) column, and are followed by the description and quantity required. O/L - “Obtain Locally” in the part number column indicates common hardware that is available at your local hardware supply. All reference to right and left, forward or rearward, are from the operator steering the DR® ALLTERRAIN ™ MOWER. The manufacturer reserves the rights to change, modify, or eliminate from time to

Torque Pounds-Foot Newtons-MeterTorque Pounds-Foot Newtons-MeterTorque Pounds-Foot Newtons-Meter BOLT SIZES Inches Millimeters MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX. 1/4 6.35 5 6 6.8 8.13 9 11.0 12.2 14.9 12 15 16.3 30.3 5/16 7.94 10 12 13.6 16.3 17 20.5 23.1 27.8 24 29 32.5 39.3 3/8 9.53 20 23 27.1 31.2 35 42.0 47.5 57.0 45 54 61.0 73.2 7/16 11.11 25 30 40.7 47.4 54 64.0 73.2 86.8 70 84 94.9 113.9 1/2 12.70 45 52 61.0 70.5 80 96.0 108.5 130.2 110 132 149.2 179.0 9/16 14.29