When entering the number, if you make a mistake, press to delete digits. 4.1.2 Direct Dialling Press to connect to the line and then enter the phone number. (Note: if you enter a wrong digit you cannot correct it with the key.) 4.1.3 Call from the phonebook Press

Note: If time has been set before, the current time will display, otherwise, 1. Follow Steps 1 to 4 in Section 7.2.1. 2. Press and to select TONE SETUP. This feature is available if you have subscribed to the Calling Line Identification 2. Enter the alarm time in 24 hour format. 3. Press and to select KEY TONE / BATTERY TONE / 1. Press to access the phonebook. 2. Press

The NEW icon will be displayed in the idle screen until all new calls have been viewed in the CID list. Note: To go directly to the first record of the CID list,press the UP or DOWN or or buttons in standby mode. *If you wish to call directly from the CID list, press the SPEAKERPHONE button or lift up the handset to dial the number automatically. Binatone Help Line : 0845 345 9677 17 To delete a Caller ID record Repeat the steps above to review the CID list, and to locatethe record you want to d

1. Press ‘Menu’ 2. Press ‘Up’ or ‘Down’ until ‘3. Settings’ is selected, then press ‘Select’. 15 3. Press ‘Up’ or ‘Down’ until ‘4. System Configuration’ is selected, then press ‘Select’. 4. Press ‘Select’ on ‘1: Network Setting’, and use ‘Up’ or ‘Down’ to change network setting to ‘DHCP’, then press ‘Save’. 5. Please refer to Section 2.5 for SIP server setup information. 6. If you only need to change the network settings, but don’t need to change the SIP server information (i.e. this is not an i

Press Menu/OK, and then press ^ or Ў until you see >Auto Talk. Press Menu/OK again. Press ^ or Ў to turn Auto Talk >On (or >Off). Press Menu/OK to confirm. Press DEL/Mute to return to the idle screen. Handset Naming Press Menu/OK, and then press ^ or Ў until you see >Display. Press Menu/OK again. You will see >Handset Name. Press Menu/OK again. Use the dialpad to enter the desired name. Use < and > to move the cursor left and right. Use DEL/Mute to erase letters. When finished, press Menu/OK to

Read and understand all instructions. 2. Follow all warnings and instructions marked on the telephone. 3. Do not use this telephone near a bathtub, kitchen sink, wash bowl, laundry tub, in a wet basement, near a swimming pool, or anywhere else where there is water. 4. Avoid using a telephone(other than a cordless type) during an electrical storm.There may be a remote risk of electric shock from lighting. 5. Do not use the telephone to report a gas leak in the vicinity of the leak. 6. Use only th

2. Press to scroll through the list of numbers until the desired number is displayed. 3. Press to dial the number. 28 or or or Redial Book Options Redial Book Options allows a number to be added to the the redial book. 1. Press the Redial soft key in standby mode. 2. Press to scroll through the list of numbers until the desired number is displayed. 3. Press the More soft key to choose the desired option. Add to PB allows the number to be added to the phonebook. Delete removes the selected number

Software changes may have occurred after this printing. Bell Atlantic Mobile reserves the right to make changes in technical and product specifications without prior notice. 4 NTENTS 1» Introduction 3 Important information ....................................................8 Getting Started 11 Front View ...................................................................11 LCD Icons ...................................................................13 Using the Battery Pack ..........

This helmet is certified to EN 1078. LIMITED IMPACT PROTECTION Helmets reduce or prevent many injuries. But, impact forces, even in a common low speed accident, can result in serious injury or death. Energy absorbing materials used in helmets crush on impact. Sometimes, the blow can crush the material completely. When this happens some of the force is transferred to the head. If the force is great enough it can cause injury or death. Because every accident is different, it’s impossible to predic

page 3 USING To set the time the Celestia will answer a call, to SETTINGS Recording your outgoing message 1 Press and hold until you hear a ‘beep’ 2 Speak clearly into the microphone Your outgoing message (OGM) can seconds long. The display shows the speak. Do not pause for more than 10 seconds. 09:35 13-10 02/05AM MSG 00-32 -5 OGM REC To check your OGM at 3 Press the PLAY/PAUSE/STOP button when any time you have finished speaking The machine will ‘beep’ then play back your OGM. pausestop • Pres