The 1154B is designed to switch high definition component video up to 1080p and audio signals including stereo (analog), digital coaxial, and digital optical audio, all delivered to the viewer with their original vividness, brightness, and clarity. The 1154B includes automatic cross-conversion between digital audio formats, outputting both, and a defeatable AutoSelect logic automatically chooses the active source. Manual control is available via IR remote with discretes (included) or touch-sensi

AutoSelect is a trademark of Audio Authority. Copyright November, 2006, all rights reserved. Audio Authority Corporation Lexington, Kentucky 2 Audio Authority Model 1171 User Manual Table of Contents Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 General Information. . . . . . . . . . . . . . . . . . . . . . . . . . .

The Model 1185ci is the first Audio Authority distribution amp expressly designed for Custom Installers of Home Theater systems. It includes the most-asked-for features, such as ultrawide video bandwidth, audio channels that also pass sync for RGBHV displays, and full optical/ coaxial support of digital audio with automatic conversion. Housed in a durable steel enclosure, the Model 1185ci also has side-looking input and output jacks for extra compact cable routing. Audio Authority also offers an

If you find any items are missing, contact Audio Authority immediately. Have the Model Number, Serial Number and Invoice available for reference when you call. 4.0 CONNECTING THE HARDWARE Please study the panel drawings below and become familiar with the signal input(s), output(s) and power requirements. Model 1311 DVI + Digital Audio to HDMI Converter Model 1312 HDMI to DVI + Digital Audio Converter 5.0 OPERATING THE UNIT Before installation, please make sure all devices you wish to connect hav

. . . . . . . . . . . . . . . . . . . . . 4 2.0 Specifications . . . . . . . . . . . . . . . . . . . . . . 5 3.0 Checking Package Contents . . . . . . . . . . . . . . . 6 4.0 Connecting The Hardware . . . . . . . . . . . . . . . 6 5.0 Operating The Unit . . . . . . . . . . . . . . . . . . . 7 6.0 Troubleshooting . . . . . . . . . . . . . . . . . . . . 14 7.0 Limited Warranty . . . . . . . . . . . . . . . . . . . 14 8.0 Regulatory Compliance . . . . . . . . . . . . . . . . 15 9.0 Contact Informat

To distribute the same signal to TVs with HD component inputs as well as TVs with composite or S-Video inputs, a quality down-converter is required. The Model 1361 converts an HD component or PC video signal to standard analog NTSC or PAL video. Output is either composite and S-Video or standard definition component (YCbCr) format, with a simultaneous HD pass-thru. The Model 1361 settings are controlled via front panel push-button, an IR remote or an RS-232 interface and its over-scan feature al

• To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture. • This product must be installed by qualified personnel. • Do not open the cover—there are no user-serviceable parts inside. • Do not expose this unit to excessive heat. • Install only in dry, indoor locations. • Clean the unit only with a dry or slightly dampened soft cloth. LIABILITY STATEMENT Every effort has been made to ensure that this product is free of defects. Audio Authority cannot be held liab

The sensor’s operating temperature range is -20° to +55°C (-4° to 131°F). A heater may be required in the drive-up enclosure for some low temperature applications. 1. Using a flat blade screw driver, carefully remove the knockout on the bottom of the 1520 Lane Station. 2. Plug the 1547 connector into the exposed port on the bottom of the 1520. 3. Drill two 5/16 inch holes 3/8 inch apart. Center the holes on the 1547’s IR emitter and receiver lenses (see detail below). 4. Turn the potentiomet