Das Halsband passt Hunden mit einem Halsumfang von 23 bis 56 cm. Der Empfanger UL-275 besitzt eine LED-Anzeige. Sie zeigt nicht nur eine schwache Batterie an, sondern bestatigt auch, welche der funf Reizstufen eingestellt ist. Der Empfanger ist mit einem Speicher ausgerustet. Nachdem Sie die Batterien des Empfangers gewechselt haben, mussen Sie die Reizstufe nicht neu einstellen. Die LED-Anzeige zeigt durch Aufblitzen die zuletzt gewahlte Reizstufe an. Einlegen des Batterie-Moduls in den Empfang

The Receiver Collar should NOT be on your dog when the system is tested. Note: The Receiver Collar is waterproof, which can make the tone hard to hear. The flashing Test Light when held to the Contact Points indicates the Receiver Collar is delivering Static Correction. To best utilize the automatic Run-Through Prevention feature, the containment Boundary Width should extend at least 6 to 10 feet on each side of the Boundary Wire (total Boundary Width of 12 to 20 feet). 6A 1. Apply Power to the

Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION, used without the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in harm to your pet. NOTICE is used to address safe use practices not related to personal injury. • Not for use with aggressive dogs. Do not use this product if your dog is prone to aggressive beha

. 2. Place the Receiver Collar on your pet and wait at least 10 minutes before placing him in the yard. No other people or pets should be in the yard, as you do not want your pet to associate the Correction with anything other than his digging. Your pet must be securely fenced in or contained during training. 3. From a window or area where your pet cannot see you, wait until your pet begins to dig. 4. While your pet digs, press and hold the Top Button (light blue) to deliver Vibration only, or t

General Tips Introducing the Remote Trainer: Introduce your PetSafe® collar when your dog graduates from puppy stage and understands basic obedience commands - usually from 4-6 months old. Avoiding a “Collar Wise” dog: Try to avoid letting your dog become “collar wise”, obeying only when wearing the PetSafe® collar. Similarly, avoid letting the dog learn to obey only when seeing the Transmitter in your hand. This is easy to prevent (see #2 in the following Training Recommendations section). Trai

PDT00-11312 Thank you for choosing PetSafe®, the best selling brand of electronic training solutions in the world. Our mission is to be the most trusted brand in the pet ownership experience.We want to ensure your pet’s safety by providing you with the tools and techniques to successfully train your pet. If you have any questions, please contact the Customer Care Center at 1-800-732-2677 or visit our website at To get the most protection out of your warranty, please register your product within

Lift the rubber dust cover protecting the Handheld Transmitter Charging Jack. 2. Connect one of the charger connectors to the Handheld Transmitter Charging Jack (1A). 3. Plug the charger into a standard wall outlet. The Red LED will light up. When fully charged, the LED will change to Green. 4. When charging is complete, be sure to replace the rubber dust cover. Note: Approximate battery life between charges is 40 to 60 hours, depending on frequency of use. The Transmitter has two LED’s used to

PetSafe® products are specifically designed to make this task simple. It is easy and you should find the point where your dog first perceives the Vibration or the Static Stimulation. See Find the Best Vibration or Static Stimulation Level for Your Pet on page 12. 4. “Good Dog” in the Home or Outside: Stopping unwanted behavior is easy using the PetSafe® Remote Trainers. Your dog can be good in and out of the house. Remember to be fair to the dog and remove temptation whenever possible. Following

. If you have purchased a pre-assembled kennel, the gate panel and back panel must be positioned to the inside of the side panels. Step 1: Using the enclosed cable ties, LOOSELY attach the SunBlock Top at the middle grommets of each side. Step 2: Working from the center of each side, LOOSELY attach each grommet with a single cable tie. Attach each grommet except the corner grommets. Step 3: Hand tighten all cable ties equally and cut off excess. Step 4: Once this is completed, the corner gro

BATTERY 6V RFA-67 Thank you for choosing PetSafe®, the best selling brand of electronic training solutions in the world. Our mission is to be the most trusted brand in the pet ownership experience.We want to ensure your pet’s safety by providing you with the tools and techniques to successfully train your pet. If you have any questions, please contact the Customer Care Center at 1-800-732-2677 or visit our website at To get the most protection out of your warranty, please register your product w