3. If the PC(or the sound card of the PC) has an analog audio output connector, connect the PC's audio output to AUDIO INPUT port located on the right side of RGB INPUT port. How To Use 1. To get the best picture quality, adjust the PC graphics card to 1024x768, 60Hz. 2. Select HDMI1/DVI input source in main input option of SETUP menu.(Refer to P.23) TV/VIDEO button is also available for this purpose. 3. Check the image on your TV. There may be noise associated with the resolution, vertical patt

Note: The Remote Control may not be able to control all models of other brands. 1. Test your Remote Control. To find out whether your remote control can operate the device with out programming, turn on the device such as a the VCR and press the corresponding mode button (VCR) on the remote control while pointing at the device. Test the POWER and CH +/-buttons to see if the device responds properly. If not, the 2 remote requires programming to operate the device. 2. Turn on the device to be progr

1. 3. SCART INPUT 4 SIGNAL MEMORY CALL .......... Use to select AUTO, USER 1 or USER 2. See page 18. HORIZ. POSITION ...... Use to adjust the horizontal position of the image. VERT. POSITION ........ Use to adjust the vertical position of the image. FINE SYNC. ......... Use to synchronize the projector with PC input signals so that the image is not blurred. TRACKING .......... Use to avoid image noise such as wide stripes. COMPUTER INPUT ...... The unit adjusts itself automatically when connecte

(Available only when VIDEO is selected as the source.) • When the TV50 (PAL, SECAM) signal is inputted, TINT can’t be adjusted. SHARPNESS ...... Adjusts the image sharpness. The image sharpness rises as the number increases. GAMMA MODE ..... When AUTO is selected, the appropriate gamma mode is automatically selected depending on the input signal. For normal use, select AUTO. Select DYNAMIC for computer sources. Select STANDARD for sport scenes and video sources. Select THEATER for projecting fil

Press the $ or % button to select the OPTION menu. Opt INSTALLATION 3. Press the ENTER button (or } button). 5. Press the $ or % button to adjust auto power off time. AUTO POWER ON ON AUTO POWER OFF 30 min TEST SIGNAL ON OFFTEST 6. Exit the menu system by pressing the MENU button several times. Opt IMAGE REVERSE INSTALLATION KEYSTONE 0° AUTO POWER ON ON AUTO POWER OFF 0 min TEST SIGNAL ON OFFTEST R • If the menu operation is not working, press the RESET button on the terminal board using the sui

Select the desired input source by pressing the . or . buttons on the control panel (or { or } buttons on the remote control). Selects the desired position of the sub-image. Select the desired position by pressing the . or . buttons on the control panel (or { or } buttons on the remote control). Selects the desired size of the sub-image. Select the desired size: small, middle or large by pressing the . or . buttons on the control panel (or { or } buttons on the remote control). Selecting No. 5 o

• To change to a new passcode, use the number buttons to ENTER enter a new code, then press . IMPORTANT IMPORTANTIMPORTANT When changing or deleting your passcode, you must use the remote control included with this TV. You cannot use a remote control from another Mitsubishi component and you cannot use “Universal” remotes from other manufacturers. This page is blank Appendix 4 - INPUT-3 Video Connection Compatiblity INPUT-3 Component Video connection compatibility This input is compatible with c

Specifically, we promise that you will be able to have your television upgraded, at a reasonable cost, to include an off-air HDTV tuner, a cable TV tuner (for unscrambled programming), an IEEE 1394 (FireWire®) connection, HAVi system control, and 5C copy protection. 8 Unpacking Your New TV Please take a moment to review the following list of items to ensure that you have received everything including: (+■ AA I (+■ AA ' 2 AA Batteries (WS-48413, WS-55413, WS-65413) A Mitsubishi THEJJIG S

Do not force the clip. The clip will slide into place. This completes the Diamond Shield installation. The Diamond Shield protects the actual television (lenticular) screen, however it can be removed to reduce glare or background reflections. Removal: To remove the Diamond Shield, reverse the order of the above procedure. WARNING Sharp edges! Always wear gloves to handle, lift and install the Diamond Shield and molding clips. Sharp objects (such as tools, hand jewelry and fingernails) may s