System choices consist of a 800-channel PLL-synthesized UHF Receiver with either a handheld microphone or lavaliere microphone and body-pack transmitter. Headset microphone available. WIRELESS SYSTEMS UHT800 UDR800 UBP800 UDR800• Sleek metal housing with internal antenna for optimum aesthetics and durable long life •Uni-directional neodymium dynamic cartridge for optimum sound, maximum feedback rejection, and minimal handling noise • Audio mute switch allows convenient audio muting while leaving

Specifications subject to change without notice. 54-2134-01C 1204 Notice Every effort was made to ensure that the information in this guide was complete and accurate at the time of printing. However, information is subject to change. Important Safety Information WARNING: To Reduce The Risk of Fire Or Electric Shock, Do Not Expose This Apparatus To Rain Or Moisture. Always follow these basic safety precautions when installing and using the unit: 1. Read these instructions. 2. Keep these instructi

Make sure that the power is disconnected and all other connections are completed before proceeding. Move the slide switches on the UTI312 to the positions shown below. Use a modular telephone cord to connect the module to the phone system.The center two conductors are used for dry audio and are not polarity sensitive.The Trunk Disconnect feature is not available in this mode. Note:The default time-out is factory set to 30 seconds,and the VOX time-out is set to 6 seconds.If both the default and V

Specifications subject to change without notice. 54-2095-01A 0406 © 2004 Bogen Communications, Inc. All Rights Reserved. Printed in Taiwan. Notice Every effort was made to ensure that the information in this manual was complete and accurate at the time of printing. However, information is subject to change. FCC Statement (Part 15) - Radio Frequency Interference The Universal Telephone Interface (UTI1) generates and uses radio frequency energy and if not installed and used in strict accordance wi

CONTENTS INTRODUCTION ............................................................................................1 USING THIS MANUAL ....................................................................................1 SYSTEM FEATURES ........................................................................................2 UDR800 RECEIVER ......................................................................................3-5 UHT800 HANDHELD MICROPHONE TRANSMITTER..............................

A rack mounting kit is included. Product Features: • 3-mode random playback (full random, • 5-Disc CD changer program random, disc sequential random) • Load or remove discs without • Includes rack mount kit (3 rack spaces) interrupting play mode • UL and C-UL listed • Stereo output via analog RCA jacks and digital output via coaxial and optical jacks • Program up to 32 tracks from up to five separate discs • MP3 and WMA decoders • Infrared remote control Power Requirements: 120V AC Dimensions: 1

Other switches are at installer’s discretion. STATION ACCESS Set switches in black as indicated. Other switches are at installer’s discretion. 1 0 1 0 1 0 The contact closure contact set is provided to signal to external equipment the TAMB2.s operational state. The contact set is single pole, double throw, and changes state from what is screened below the terminals when the TAMB2 becomes active and returns when the unit becomes idle again. Contact Ratings: 0.6A @ 125V AC resistive 0.6A @ 110V DC