ground fault interrupter. It is highly recommended that smoke 3. Press and hold the test button until the alarm sounds. NOTE: It lightning, children playing with matches, or arson. • In the center of a room or hallway: As it is impossible to predict alarms be wired on a separate circuit (one with no other lights or may be necessary to press the test button for up to 20 seconds for anthe source of a fire. If it is necessary to place the alarm on a wall, appliances) to ensure maximum reliability o

WHERE TO LOCATE SMOKE ALARMS WARNING ! This smoke alarm is suitable for residential Alarm-Pause® period, the smoke alarm should “beep” DICON GLOBAL INC. SHALL HAVE NO basement smoke alarm may not detect a fire which started on use. It is not to be connected to a approximately once every 45 seconds to alert the household that LIABILITY FOR ANY PERSONAL INJURY OR PROPERTY As a minimum, smoke alarms should be located between the first or second floor. commercial or industrial fire alarm panel. the

Interconnect units within a single family residence only. Otherwise all households will experience unwanted alarms when you test any unit in the series. Interconnected units will only work if they are wired to compatible units and all requirements are met. The wiring shall be in accordance with the provision of Articles 210 and 3003 (B) of the National Electrical Code, ANSI/NFPA 70. The resistance of the interconnecting wiring shall be a maximum of 10 ohms. This unit is designed to be compatible

ORANGE Interconnect ANY KIND. APPROPRIATE COVERAGE IS YOUR DO NOT PLACE SMOKE ALARMS: RESPONSIBILITY. CONSULT YOUR INSURANCE AGENT. • In turbulent air from fans, doors, windows, etc. The rapid air •Relay Connection This warranty gives you specific legal rights and you may have other movement may prevent combustion particles from entering the rights which may vary from province to province. Model ESA5011 only - The ESA5011 smoke alarm provides one alarm. Form C, normally open/normally closed cont

Determine that the initiating alarm triggers other alarms in the violent explosions, escaping gas, improper storage of flammable next alarm. wire. NOTE: The SA360 and ESA5011 are interconnectable system. with up to 11 other units. materials, overloaded electrical circuits, natural causes such as • In the center of a room or hallway: As it is impossible to predict 7. Model ESA5011: Pressing the test button activates the relay. lightning, children playing with matches, or arson. the source of a fi

It is normal for this light to turn on once or twice after you power the detector or after a power failure. A G What should you do if the ALARM sounds? EVACUATE IMMEDIATELY! Do a head count to check that everybody is accounted for. Call the nearest fire department and ask them to determine the source of propane gas. Do not re-enter the premises until the problem has been corrected and the propane gas has been dispersed. ! WARNING: Activation of this device indicates the presence of propane g

THIS DEVICE IS NOT SUITABLE FOR INSTALLATION IN A HAZARDOUS LOCATION, AS DEFINED IN THE NATIONAL OR CANADIAN ELECTRICAL CODE. Introducing the LP401, LP401A, LP405, LP405A Propane Gas Detector The LP401, LP401 A, LP405, LP405A Propane Gas Detectors are effective products for detecting any build-up of propane gas in your home. Dicon Global Inc., the maker of these propane gas detectors, has been developing and making products for detecting gases since 1985. Your new detector: • Is easy to inst

The alarm sounds. To reset the alarm, turn the 12 Volt supply off, wait ten seconds, then turn it on again. A. Why should you be concerned about propane gas? Propane gas is a colorless, flammable gas that can be explosive if it escapes and builds up. Propane is stored as a liquid under pressure, so most likely sources of leaks are in the connections to propane tanks for propane-pow-ered heaters, stoves, refrigerators, furnaces, and barbecues. When propane leaks, it becomes a gas and can be i

Warranty Information Limited Warranty Dicon Global Inc. warrants its enclosed Propane Gas Detector sensor to be free from defects in material and workmanship under normal use and service for a period of five (5) years form date of purchase. Dicon Global Inc. warrants it's enclosed Propane Gas Detector other than the sensor to be free from defects in materials and workmanship under normal use and service for a period of one (1) year from date of purchase. Dicon Global Inc. makes no other express

CB100 INSTRUCTION MANUAL Page 1 This manual contains instructions for installing your American Sensors™ relay module. The relay module is ULC listed as an accessory for use only with American Sensors™ interconnectable smoke alarms in the 470L, 670L and 770L series, plus models SA360, SA379, ESA5011 and combination CO/Smoke alarm model C0S2010. WARNING: This relay will not operate without continuous AC power. Do not use with battery backup units. CAUTION: Do not interconnect Model No. CB100 t