Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
Supports HDCP pass-through. Package Includes (1) DVI FM 2000 Extender - Sender Unit (EXT-DVI-FM2000S) (1) DVI FM 2000 Extender - Receiver Unit (EXT-DVI-FM2000R) (1) 5V DC Power Supply (EXT-PS52AIP-1.3) (1) Quick-Start Guide (QSG-DVI-FM2000) 3 SENDER UNIT LAYOUT Front Back 4 SENDER UNIT DESCRIPTIONS 1 Status This LED indicator will glow bright blue, indicating that there is a valid connection between the Sender Unit and Receiver Unit. This LED will glow red when there Is an interruption In the signal between the Sender Unit and the Receiver Unit. 2 Power Receptacle Connect the optional 5V DC power supply to this receptacle only if the source does not supply enough voltage to power the Sender unit. In most situations, the power supply will not be required. 3 SC Fiber Connectors Connect two SC Fiber Optic cables from the Sender Unit to the Receiver Unit. Make sure that the Fiber Optic cables from both port A and B are connected to the same ports on the Receiver Unit. See page 8 for details. 4 DVI Input Connect this part of the Sender Unit to the DVI port on the computer. 5 RECEIVER UNIT LAYOUT Front Back 6 RECEIVER UNIT DESCRIPTIONS 1 Status This LED indicator will glow bright blue, indicating that there is a valid connection between the Receiver Unit and Sender Unit. This LED will glow red when there is an interruption in the signal between the Receiver Unit and the Sender Unit. 2 Power Receptacle Connect this cable to the included 5V DC power supply. 3 SC Fiber Connectors Connect two SC Fiber Optic cables from the Receiver Unit to the Sender Unit. Make sure that the Fiber Optic cables from both port A and B are connected to the same ports on the Sender Unit. See page 8 for details. 4 DVI Input Connect this part of the Receiver Unit to the DVI port on the Dual Link DVI display. 7 CONNECTING THE DVI FM 2000 How to Connect the DVI FM 2000 1. Connect the Dual Link DVI source to the Sender Unit. 2. Connect the Dual Link DVI display to the Receiver Unit. 3. Connect the Sender Unit and Receiver unit together using two SC multi-mode fiber optic cables. 0 IMPORTANT: On the bottom of both the Sender Unit and Receiver Unit, each fiber optic port is identified by the letter A or B. Make sure that the fiber optic cables between the Sender Unit and Receiver Unit are connected to the proper port, as shown below: 4. Connect the 5V DC power supply to the Receiver unit. 8 WIRING DIAGRAM Wiring Diagram for the DVI FM 2000 SC FIBER OPTIC CABLE EXT-DVI-FM2000 ATTENTION: This product should always be connected to a grounded electrical socket. 9 SPECIFICATIONS Maximum Pixel Clock................................................................................................................2 x 165 MHz Input Video Signal...........................................................................................................................1.2V p-p Input DDC Signal......................................................................................................................5V p-p (TTL) DVI Connector (Sender / Receiver)...............................................................................DVI-D, 19-pin, male Fiber Optic Connector (Sender / Receiver)......................................................................................SC type Power Supply (Sender / Receiver).....................................................................................................5V DC Power Consumption.....................................................................................................2.5W (max.) per unit Operating Temperature..................................................................................................................0 ~ 50 °C Storage Temperature.................................................................................................................-20 ~ 70 °C Relative Humidity.......................................................................................................................10% ~ 80% Dimensions (Sender / Receiver).......................................................................1.97” W x 0.59” H x 2.98” D Shipping Weight...................................................................................................................................2 lbs. 10 WARRANTY Gefen warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen Is notified within two (2) years from the date of shipment, Gefen will, at Its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifications. The two year warranty Is only valid on new products purchased as of January 2007. All products purchased before this date still retain their 1 year warranty. Equipment that fails under conditions other than those covered will be repaired at the current pr...