Ventilation soap dispenser B. Liquid soap connetions C. Hard water connections 3/4" D. Warm water connections 3/4" E. Soft water connections 3/4" F. Connections clamps G.Electrical connections H.Emergency button I. Ventilation tub K. Drain valve L. Steam connections Dimensions 2 HF150 - 185 720 35 1265.5 1386 155.5 251 346 94 173 165 105 1309.5 F L K A C B D E G I 1500 738 900 81 81 1527.5 645 HF234 = 939.5 HF234 = 926 HF234 = 830 70 35 60 35 240 H Dimensions 2 HF234 A. Ventilation so

The total time of both programs together is not displayed. The right display alternately shows the program in operation (during a longer time span) and the second program to be executed (during the shorter time span). After the fi rst program has been run, only the second program number will be displayed. Cool down This function allows to gradually lower the temperature of the wash bath to prevent creasing of the linen. During a cool down, the remaining program time on the central display will b

This correction will have to be preprogrammed and is not activated on program numbers higher than 20. The corrected time will also be lost when the power has been cut from the machine for more than 24 hours. The right display will continue to show the selected program number. If a Level-stop was programmed (which halts the programmer during the fi lling of the cylinder) and/or a Heat-stop (which stops the programmer during the heating up of the wash bath, then the respective LED’s light up in th

By activating F1 during low spin, this low spin will be extended to15 minutes unless the START button (S) is pressed earlier. If the 15 minutes of low spin have been completed, the high spin isautomatically canceled. By activating F1 after the preprogrammed low spin, you will have a maximum of 14 minutes of high spin unless the START button (S) is pressed earlier. Adjustable stop time : Here you can program a certain stop time. The display shows the countdown of this extra time. When this time i

3 2 Technical data and dimensions ....................................................... 4 Technical data ................................................................................ 4 Dimensions ..................................................................................... 5 3 Installation and connection ............................................................. 6 Ground ............................................................................................ 6 Removing the tr

056/41 20 54 - Fax 056/41 86 74 (Typewriter comment Part No. D0163) General Information Dear Customer, Please read the instructions for use before first using your ironing machine. These instructions provide important information on safety, use and maintenance of your appliance. They will protect you and prevent damage to the appliance. Keep these instructions for use in a safe place and pass them on to any subsequent owners. This ironer is a domestic appliance and is not intended for commercial

†Includes 6" for five-compartment supply dispense (optional). Due to continuous improvements, design and specifications subject to change without notice. The quality management systems at all Alliance Laundry Systems manufacturing facilities are registered as ISO 9001:2000 compliant. Printed in the U.S.A. Printed on paper manufactured with virgin pulp from certified sources and a minimum of 10% post-consumer recovered fiber. AL07212©Copyright2007AllianceLaundrySystemsLLC TheWasher-ExtractorFeatu

Box 32270 Louisville, KY 40232-2270 Phone: (502) 587-1292 Sales Fax: (502) 585-3625 Part No. AJ1031 Service/Parts Fax: (502) 681-1275 February 2005 Installation Table of Contents Model Identification ........................................................................... 3 Safety Information.............................................................................. 5 Explanation of Safety Messages........................................................... 5 Important Safety Instructions .

The currents listed are rated for system voltage ranges of 110 – 220 and 220 – 240. ** Rated Amperes are to be used to determine incoming conductor size and short-circuit protection. Rated amperes are figured in accordance with the 1981 NATIONAL ELECTRIC CODE, Sections 430-22 and 430-24. Table 2 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT AJ1031 Installation Overall Dimensions and Connecting Data SCR97N OPENOPENCLOSECLOSECLOSECLOSESTEAM INLETSTEAM INLET 36-7/8 in. (93.7 c

These precautions are intended for the personal safety of the operator, user, servicer, and those maintaining the machine. Indicates an imminently hazardous situation that, if not avoided, will cause severe personal injury or death. DANGER Indicates a hazardous situation that, if not avoided, could cause severe personal injury or death. WARNING Indicates a hazardous situation that, if not avoided, may cause minor or moderate personal injury or property damage. CAUTION Additional precautionary st