3 Marian Lane Brodheadsville, PA 18322 Issue date: 12/05/08 TABLE OF CONTENTS 1) Introduction 2 2) Unpacking the Apollo monoblocks 2 3) Connecting the Apollo monoblocks 3 4) Operation of the amplifiers 4 5) Setting the tube bias 5 6) Troubleshooting 7 7) Registration card 8 8) Fuse values 8 9) Specifications 8 10) Warranty 9 INTRODUCTION Congratulations on your purchase decision! We at Rogue Audio truly believe that our amplifiers provide the “smartest” value in high-end audio. If you have never

This hard shutdown condition can only be reset by shorting the FIREBOX or UL connectors on the left side of the circuit board to ground. If a firebox is used in the installation, The firebox door should be opened and closed to reset the circuit board. Once the operator is installed or if the control board is replaced, you will need to program the control board for proper current sensing. The operator should be functional and the open and close limits set. 1. Push and hold the LED ENABLE button f

3 Applications .............................................................. 4 Pre-Installation Checklist ........................................ 5 Parts Identification ................................................... 6 Operator Installation ................................................ 7-9 Pivot Arm Installation Actuator Installation Control Box Installation Connecting the Actuator Gate Bracket Installation Limit Switch Adjustment Control Board Connections Control Board Adjustments - Le

Kleinkinder sind in der Nahe des Holzkohlengrills zu uberwachen. Dieser Grill sollte unter keinen Umstanden abgeandert oder umgebaut werden. Wahrend des Vorwarmens sollte der Deckel zu sein. Dieser Holzkohlengrill ist nur fur den Gebrauch im Freien geeignet. Der Mindestabstand zu allen brennbaren Materialien muss eingehalten werden (46 cm in jede Richtung). Die Einheit nicht unter einer ungeschutzten, brennbaren Uberbauung aufstellen. Den Grill nicht wahrend der Benutzung unbeaufsichtigt lassen.

All have an unobtrusive profile, a zero insertion force base, user friendly addressing and extended data and alarm features. A manual call point, an isolating base, sounders, beacons and other compatible products are also available. These detectors have been carefully researched and developed by the Apollo design team and the range has undergone rigorous testing to ensure that it meets not only European and other standards but also the demands of today’s high technology environments. This Produc

STEP 5 GATE BRACKET INSTALLATION Activate push button on the side of the control box and extend the actuator until it stops (PULL TO OPEN only, leave actuator retracted for PUSH TO OPEN). WARNING: Do not let extension tube rotate as it extends. Do not insert fingers or tools in the hole at the end of the extension tube Align the hole in the end of the actuator extension tube with the holes in the gate bracket and locate gate bracket mounting position with the gate in the closed position. Weld or

Use mounting hardware capable of supporting the weight of the control box with the battery installed. Mounting holes are not provided since mounting surfaces will vary. STEP 4 Connecting the Actuator (s) Set battery inside of control box with terminals toward the front (Do not use any battery with side terminals). Connect actuator cable to the “MASTER” connector on the control board. If a 1600 is being installed and conduit is being used under the drive (recommended), cut the slave (opposite sid

With proper care and maintenance your bicycle will give you years of riding pleasure. Use this owner’s manual as a guide for the recommended maintenance and safe usage of your new bicycle. Take the time to read and understand this manual; and for parents of young riders please explain the content to your child. Please note that it is not intended as a full workshop manual. Every effort has been made to ensure that the content in this manual is accurate and current as at May 2007. Please consult

The Choice: 3T, 2T, 4T, Reserved. u RAS TO CAS DELAY This item defines SDRAM ACT to Read/Write command period. The choice: 3T, 2T, 4T, Reserved. u DRAM BACKGROUND COMMAND This item is lead-off time control for DRAM background command. When select 'Delay 1T', background commands are issued 1 clock behind memory address (MA) been issued. When select 'Normal', background command and MA are issued at the same time. The choice: Delay 1T or Normal. 7-118 APOLLO 120/150 III User Manual version 2305 u L

Back Panel Assembly The back panel module is the last module to be integrated to the APOLLO main system before the plastic housing is to be installed to the system. 1. On the I/O board, there are 6 D-SUB connectors with 2 bronze sticks on each side. Remove the 12 bronze sticks. 2. Insert the I/O board to the I/O bracket (2) and fix them together with the 12 bronze sticks. Fix them again with 2 screws on the other side. 3. Fix the complete I/O module to the metal back panel (1) five FMS 3*5 screw