During this period, all service and parts necessary to repair a defect will be free of charge. This limited warranty applies to mechanical parts which are subject to wear and tear as specified: • Faders (except P&G fader), specified durability: 15,000 cycles; • Rotary potentiometers, specified durability: 10,000 cycles; • Switches, specified durability: 10,000 cycles. Consequently, the parts listed above are warranted to be free from defects in materials and workmanship for a period of thirty da

Check all input and tion. Shorted cable. output connections for s e c u re fit. Isolate and re p l a c e the damaged cable. Pro g ram volume canOt be Amplifier or outboard gear Connect amplifier or outboard adjusted with master vo l u m e connected to the re c o rd out-gear to master output. c o n t ro l . put. No powe r. I m p roperly connected AC cord Properly connect AC cord to or power line source not on AC power source. Turn powe r o n . The amplifier is turned up, Faulty output connections

x 8.66 in. x 4.72 in. (48 cm. x 22 cm. x 12 cm.) 4.5 kg (9.9 lbs) Congratulations on your choice of the Stanton RM-22 Professional DJ Mixer. You now own one of the most flexible DJ mixers ever designed. The rackmountable RM-22 offers up to three Microphone inputs, three Phono inputs and nine Line inputs—making it one of the most powerful DJ mixers around. And with Stanton’s smooth fader movement and rock-solid reliability, it’s the perfect mixer for mobile and club DJs alike. Please take a momen

This innovative family of mixers has been developed with input from the professional DJ community, bringing a previously unavailable, combination of user- friendly, functional design, rugged construction, and professional quality features together at an afforfable price. Stanton and your authorized Stanton dealer are dedicated to your complete satisfaction by offering benchmark service and support throughout the long life of your Stanton product. We appreciate your patronage, and look forward to

2. Once casing has been removed wipe down the rails with a cotton swab to remove excess dirt. 3. Lubricant can be applied to the rails. Thinner liquid-like lubricant is suggested but if you desire a slower or more resistant focus fader you may use grease like lubricant. (10) Cue Level – Controls the headphone output (23) level. (11) Rumble Filter – Rumble is a term used to describe mechanical vibrations traveling through the turntable into the stylus and being amplified as low frequencies. The r

A Mains plug with fuse and voltage selector. Changing the fuse: The lid for the housing of both fuses can easily be opened by pressing both sides of the lid simultaneously. After changing the fuses, please make sure the lid is closed securely. To switch the voltage selector it is also necessary to open the fuse housing. You must now twist the plug to the desired voltage setting. The selected voltage can be seen from outside. Make sure to replace the fuses with the necessary value, as indicated o

7. Booth level control: Controls the signal level of the booth output. 8. Headphone level control: Controls the overall headphone output level. It is recommended headphones with an impedance rating of 200 ohms or less be used for maximum volume. 9. Headphone output: Connection for 1/4 inch headphone. Recommended headphone impedance is 32-200 ohms for maximum volume. 10. Cue pan: Fades the headphone output between the channel(s) selected by the cue assign switches (15) and the master one output,

Check all input and output connections for s e c u re fit. Isolate and re p l a c e the damaged cable. Pro g ram volume canOt be adjusted with master vo l u m e c o n t ro l . No powe r. Amplifier or outboard gear connected to the re c o rd output. I m p roperly connected AC cord or power line source not on. B l own fuse. Connect amplifier or outboard gear to master output. Properly connect AC cord to AC power source. Turn powe r o n . Re m ove the fuse cover with a flat-bladed scre wd r i ve r.

6.7) Secure the remaining end block ensuring that the track wires (I) are not pinched between the end block and fader casing. 7. Once assembled, move the slider from end to end to ensure operation is smooth. 8. Attach fader to fader plate. (NOTE: As noted earlier if you do not want to change positioning of fader, keep the 2 fader plate screws loose and shift the fader until it is aligned with the marks you created in step 1, then tighten fader plate screws.) TECHNICAL SPECIFICATIONS TECHNICAL SP

This will ensure long life and keep a smooth feeling throughout the fader's lifetime. Follow the instructions below to lubricate and clean your faders: REMOVING A FADER: 1. Make sure mixer is powered off and power supply is disconnected from the back of the mixer. 2. To remove the lower faceplate, take off all the fader knobs and then remove the 4 screws located on the sides of the mixer (2 on each side). Lift up on the faceplate and it will slide off. 3. Remove the fader to be cleaned or replac