(2.4 m) • (1) Allen Wrench (5/16”) • (1) Allen Wrench (1/4”) > (1) Carpenter’s Level » (1) Phillips-Head Screwdriver » (2 each) 9/16” Wrenches and/or Socket Wrenches and Sockets (Deep-Well Sockets 9/16" are Recommended). TO ADJUST TENSION Remove the rim cover from the rim and make adjustments as shown. (9/16”) TO LEVEL RIM (1/4”) INSTALL NET A. Remove nylon net-holder from the rim. B. Reinstall while inserting all net loops into slots along ring as shown. ID# M415221 01/06 2

Line up holes as shown and tap together. NOTE: Make sure holes remain lined up. Secure poles as shown. ODC (° D 10 10 d 9 13 Attach legs to ple assembly using bolts (8) and nuts (13). Attach rim and board bracket to backboard using bolts (11) and nuts (20). 11 Slide backboard assembly over top pole as shown fully tightening bolts (11) and nuts (20). Secure board by inserting screws (6) as shown. 1 P/N 211745 12/04 2 Toll-Free Customer Service Number for U.S. : 1-800-558-5234 htt

• Den an der Stange angebrachten Warnaufkleber aufmerksam lesen. • Die Nutzungsdauer Ihrer Basketballstange hangt von zahlreichen au.eren Umstanden ab. Klimabedingungen, Platzierung und Aufstellort der Stange, Angriffe durch korrodierende Substanzen wie Ungeziefer- und Pflanzenvernichtungsmittel oder Salz - all das sind wichtige Faktoren. • Technische Unterstutzung kann direkt von Huffy Sports angefordert werden. • Alle Hohenverstellungen sollten von Erwachsenen beaufsichtigt werden. INSTRUCCION

(2.4 m) (1) Allen Wrench (5/16") > (1) Carpenter’s Level » (1) Phillips-Head Screwdriver » (2 each) 9/16" Wrenches and/or Socket Wrenches and Sockets (Deep-Well Sockets 9/16" are Recommended). TO ADJUST TENSION Remove the rim cover from the rim and make adjustments as shown. A. Remove nylon net-holder from the rim. B. Reinstall while inserting all net loops into slots along ring as shown. ID# M4115221 04/05 2

(2.4 m) (1) Allen Wrench (7/16”) (1) Allen Wrench (1/4”) > (1) Carpenter’s Level > (1) Phillips-Head Screwdriver • (2 each) 9/16” Wrenches and/or Socket Wrenches and Sockets (Deep-Well Sockets 9/16" are Recommended). TO ADJUST TENSION Remove the rim cover from the rim and make adjustments as shown. A. Remove nylon net-holder from the rim. B. Reinstall while inserting all net loops into slots along ring as shown. ID# M4115231 04/05 2

FAILURE TO FOLLOW OPERATING INSTRUCTIONS COULD RESULT IN INJURY OR DAMAGE TO PROPERTY. This manual, accompanied by sales receipt, should be saved and kept on hand as a convenient reference, as it contains important information about your model. 1 12/05 ID# M415064 Ring Gebrauchsanleitung Kundendienstzentrale • N53 W24700 South Corporate Circle • Sussex, WI 53089 • U.S.A. Aro Manual de usuario Centro de Servicio al Cliente • N53 W24700 South Corporate Circle • Sussex, WI 53089 • EE.UU. Anneau Gui

1/2" 1/2" • Two (2) Capable Adults • Tape Measure • Safety Glasses • Stepladder 8 ft. (2.4m) Write Model Number READ AND UNDERSTAND From Box Here: OPERATOR'S MANUAL BEFORE USING THIS UNIT. FAILURE TO FOLLOW OPERATING INSTRUCTIONS COULD RESULT IN INJURY OR DAMAGE TO PROPERTY. WARNING! • (2 each) Wrenches and/or Socket Wrenches and Sockets (Deep-Well Sockets are Recommended). • Extension is Recommended. © COPYRIGHT 2006 by SPALDING This manual, accompanied by sales receipt, should be saved and kep

WARNING 11. 16 4 13 9 4 7 4 10 7 4 10 7 4 16 4 7 4 9 16 4 16 TWO PERSON MINIMUM REQUIRED FOR THIS PROCEDURE. NOT FOLLOWING RECOMMENDATION MAY RESULT IN SERIOUS BODILY INJURY AND/OR PROPERTY DAMAGE. WARNING IMPORTANT! Do not over tighten. 14 14 14 1514 13 14 Cut foam stripping (14) to sizes shown and attach to flat side of H-frame (13) as shown. Then secure H-frame to support arms (9 & 10). NOTE: Install H-Frame (13) with foam striping toward backboard. Do this strip last. 11. 16 4 13 9 4 7 4 10

• Check system before each use for proper ballast, loose hardware, excessive wear and signs of corrosion and repair before use. • Check system before each use for instability. • Never play on damaged equipment. • Keep pole top covered with cap at all times. • See instruction manual for proper installation. In the U.S.:1-800-558-5234 and Canada: 1-800-284-8339 201240 2/99 WARNING 37 Crank Height Indicator Hook 201248 2/99 TO ADJUST BACKBOARD: Position looped end of crank onto hook as shown. Rotat