(Stand kit is optional.) [Stand (option)] [Wall-mounting] Installation Manual Included (for qualified service personnel) • To assemble this unit, please refer to the Installation manual on page 38 through 55. • Before operating this unit, please read these instructions completely and keep them carefully for future reference. • This unit is designed for installation by a qualified servicing dealer. Installation performed by non-authorized individuals could cause safety-related problems with the o

Help Installation Manual (for qualified service personnel) Table of Contents page For Your Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 Assembling the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 . Accessories for assembling. . . . . . . . . . . . . . . . . . . . . . . . . . 40 . Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Electronic Board Operations Check . . . . . . . . . .

If the studs are 12” apart, use three 3” lag bolts for the top row of mounting points and three 3” lag bolts for the lower row mounting points. If the studs are 16”, 18” or 24” apart, use two 3” lag bolts for the top row of mounting points and two 3” lag bolts for the lower row of mounting points. Step 1 Step 2 Step 3 Determine where to mount the Once all of the studs have been located, use Using a 1/4” drill bit, drill a pilotAM250/AM250-FLIP. Use a stud a pencil to mark the spots. Place the mo

THE INSTALLATION INSTRUCTIONS MUST BE READ TO PREVENT PERSONAL INJURY AND PROPERTY DAMAGE. KEEP THESE INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE REFERENCE. PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY UNAUTHORIZED ATTACHMENTS OR MODIFICATIONS, AND IS NOT RESPONSIBLE FOR ANY DAMAGES, CLAIMS, DEMANDS, SUITS, ACTIONS OR CAUSES OF ACTION OF WHATEVER

Select the desired location for the PSD-BW/L Nesting Cart. Locking Castor Non-Locking Castor Figure 1 1. Place the BW/L on a flat surface. NOTE: Make sure the locking castors (Qty 2) are attached to the rear legs of the Nesting Cart. 2. Insert each castor into the threaded mounting point located on the underside of the BW/L base (Figure 1). Turn each castor clockwise to tighten. Make sure all four castors are tightened all the way until flush with the base. Tighten using the 21mm caster wrench (

Premier Mounts is not liable for improper installation that results in damage to mounts, adapters, display equipment or personal injury. Contact Premier Mounts In the event of missing and/or damage equipment, or technical questions, the following information can help in the completion of the installation. Customer Service – (800) 368-9700 Technical Support – techsupport@mounts.com Installation Instructions Page - 2 - PSD-BW/L Warning Statements WARNING: WARNING: PREMIER MOUNTS DOES NOT WARRANT A

The solid fit keeps the display level and securely in place. • Models fit sizes starting at 24" up to 60"+ and beyond • 16", 18" and 24" mounting slots • 12° continuously adjustable tilt • Built-in lateral shift for precise placement • Set screws and security knobs for installation safety • Optional theft-resistant PaneLock™ available • Lifetime warranty • Color: Black CTM - for walls, ceilings or stands. Æ r 1 4 i Add optional PaneLock™ to help prevent unauthorized display remov

Wt. 24"-36 Wall/Ceiling/Stand I60lbs. (73 kgs.) 37"-61" Wall/Ceiling/Stand 160 lbs. (73 kgs.) 55"-63" Wall/Ceiling/Stand 160 lbs. (73 kgs.) 60"+ Wall 300 lbs. (136 kgs.) CTM-MS2 is ideal for floor stands and carts. Premier Mounts* CTM-MS4 Dimensions are in inches and millimeters [mm]. Drawings are subject to change without notice. 800.368.9700 I www.mounts.com

(73 kgs.) 60"+ Wall 300 lbs. (136 kgs.) CTM-MS2 is ideal for floor stands and carts. Premier Mounts* CTM-MS4 Dimensions are in inches and millimeters [mm]. Drawings are subject to change without notice. 800.368.9700 I www.mounts.com

Wt. 24"-36 Wall/Ceiling/Stand I60lbs. (73 kgs.) 37"-61" Wall/Ceiling/Stand 160 lbs. (73 kgs.) 55"-63" Wall/Ceiling/Stand 160 lbs. (73 kgs.) 60"+ Wall 300 lbs. (136 kgs.) CTM-MS2 is ideal for floor stands and carts. Premier Mounts* CTM-MS4 Dimensions are in inches and millimeters [mm]. Drawings are subject to change without notice. 800.368.9700 I www.mounts.com