Touching Video on the SETUP MENU will open the screen shown below. From here you can enter the setup screens for both Video 1 and Video 2 by touching their respective buttons. VIDEO SETUP Refer to the following table for additional VIDEO SETUP menu details. Video Setup Details VIDEO SETUP SCREEN CONTROL DESCRIPTION QM Audio 1 Detects the presence of QM Audio on channel 1. QM Audio 2 Detects the presence of QM Audio on channel 2. Setup Video 1 Displays the VIDEO 1 SETUP menu. By default, the VIDE
loading projects and firmware) • Touch Output (communication of touch coordinates to an external device) • Mouse Input (allows a mouse to control the touchpanel) • External Touch Input (allows another device to control the touchpanel) For convenience the RS-232 MENU also permits the selection of the RS-232 communication options Baud Rate, Data Bits, Stop Bits, Parity, RTS On/Off and XON-XOFF On/Off. Touch the communication option to select communication parameters and then touch Save and Return
15 Volvo Drive Rockleigh, NJ 07647 800.237.2041 For Commercial Lighting Solutions, refer to Doc. 4775 All brand names, product names, and trademarks are the sole property of their respective owners. Crestron Residential Lighting Design Guide Contents INTRODUCTION .................................................... 1 THE SINGLE SOLUTION CONTROL SYSTEM – A CRESTRON EXCLUSIVE ............................................................ 1 CRESTRON CONTROL TECHNOLOGY ............................ 2 C
Multi-Mode Objects Multi-mode objects offer high- performance programming! The single most-advanced VT Pro-e high-performance programming technique involving the TPS-12B/W, TPS-15B/W & TPS-17B/W is the concept of multi-mode objects. A multi-mode object (i.e. button, legend, etc.) is an object drawn on a VT Pro-e page that can have one or more active and inactive visible settings (modes). For examples, refer to and search for multi-mode object examples. This file contains the VT Pro-e touchpanel
The Exit and Run Program button verifies that all of the setup information has been saved to the EEPROM and displays the main page that has been programmed into your system. The remaining buttons on the MAIN MENU open other menus which are discussed in subsequent paragraphs. MAIN MENU Calibration Menu CALIBRATION MENU Touch Perform Calibration. The message “Touch Upper Left” appears centered on the panel with a cross hair in the upper left corner. Touch the center of the cross hair in the corner
A reduction in image size will save a considerable amount of memory space for your project. In VT Pro-e, the Compress checkbox permits the image to be compressed when compiling. The 16 Bits checkbox converts a 24-bit or 32-bit image to 16 bits. This conversion to a 16-bit image may cause the loss of some subtle shading. To compensate for this, use the dithering to simulate the original shading. Various dithering types are available. Refer to the following illustrations. VT Pro-e “Page Properties
A single model supports both 120 and 220-240 Volt electronic and magnetic low-voltage, incandescent, neon/cold cathode, two wire dimmable fluorescent and non-dimmable lighting loads up to 5 Amps per channel, 10 Amps total. Features and Functions • Four channels of forward or reverse phase dimming • Auto load detection • 120-240 Volt 50/60 Hz operation • Selectable non-dim mode • “Wilson” filter eliminates lamp flicker • Short circuit and overload protection • Master air gap relay • Override inpu
Please read the manual. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding
©2005 Crestron Electronics, Inc Contents DualTouch™ Technology Touchpanel: DTT-15V2 1 Introduction........................................................................................................................1 Features and Functions..............................................................................................................1 Specifications............................................................................................................................3 Physic
Windows®, Windows® XP and Windows® Vista are registered trademarks of Microsoft Corporation in the United States and other countries. ©2009 Crestron Electronics, Inc. Contents Isys i/O™ 8.4” TableTop WiFi Touchpanel: TPMC-8T 1 Introduction...............................................................................................................................1 Features and Functions................................................................................................1 Specificatio