206) Song arrangements (S01–S05) These are arrangements whose data is rewritable, and up to 5 different arrangements for each song can be stored on memory cards. Memory Card BR-900CD Preset Arrangement Song Song Arrangement Using the Rhythm Switching the Rhythm Mode The Rhythm mode switches each time [ARRANGE/ PATTERN/OFF] is pressed. [ARRANGE/PATTERN/OFF]: Lit (Arrangement Mode) Performance and programming of arrangements is enabled. Press [PLAY] to start the performance of the arrangement. * Y

The Loop Phrase screen will appear. 2. Move the cursor to the EDIT icon and press [ENTER/ YES]. Alternatively, you can press [F2] (EDIT) if the EDIT icon is currently displayed. The Loop Phrase Edit screen will appear. 3. Move the cursor to the Loop Phrase number and select the phrase to be edited using the TIME/VALUE dial. 4. Move the cursor to “MEAS” (length in measures) or “BEAT,” and modify the setting using the TIME/ VALUE dial. 5. Move the cursor to the start or end position for playback o

Wiring diagrams for these connectors are shown below. Make connections after first checking the wiring diagrams of other equipment you intend to connect. 23 Chapter 1 Outputting Sounds Turning on the Power Chapter 1 Outputting Sounds Turning on the Power Before turning on the power, confirm the following. • Are all external devices properly connected? • Is the volume on the GT-10B, your amp, and all other connected devices turned down to the minimum level? Once the connections have been complete

If there are any tracks that you don’t want to appear in the mix, lower their faders. * If you want to record the rhythm as part of the mix, raise the [RHYTHM] fader. 6 Press the [MASTER FX] button. The [MASTER FX] button will light, and the mastering effect will turn on. The MASTER FX screen will appear. 7 P: preset / S: song / U: user Patch name Number 8 9 10 Choose a mastering effect. Use the CURSOR [ ] [ ] buttons and the dial to select preset/song/user and the desired number. Press the [EXI

* Verwenden Sie die Buchse OUTPUT A, wenn Sie ein Monoausgangssignal ausgeben mochten. * Die Ausgabe unterscheidet sich entsprechend den Einstellungen der Regler [MODE] und [SHIFT]. Details finden Sie unter„Beschreibung der einzelnen Modi“ (S. 6–S. 9). 4. INPUT-Buchse Diese Buchse nimmt Signale von einer Gitarre, einem anderen Musikinstrument oder einem vorgeschalteten Effektgerat auf. * Die INPUT-Buchse fungiert au.erdem als EIN-/AUS- Schalter. Das Gerat schaltet sich ein, wenn Sie ein Kabel an

Individual +---------------+ +-----------------------------+ *Refer to "Table WAH" 04 00 00 00 +---------------+ +-----------------------------+ | Quick Fx | | ROM Area (Data) | ... Read Only, Individual | | +-----------------------------+ *Refer to "Table Quick Fx Data" 05 00 00 00 | | +-----------------------------+ | | | ROM Area (Name) | ... Read Only, Individual +---------------+ +-----------------------------+ *Refer to "Table Quick Fx Name" 06 00 00 00 +---------------+ +-----------------

-When the part is sung with a very low voice containing a lot of harmonics. * If the BR-600 is frequently incorrect when detecting the pitch, either change the “Type” setting for the pitch correction function. In certain cases, this will reduce the number of incorrect detections. Section Rev0.10 123 Fixing the Pitch of Vocals (Pitch Correction) Using the Pitch Correction Fixing the Pitch of Vocals (Pitch Correction) Using the Pitch Correction Let’s now use the BR-600’s pitch correction feature t

[WRITE] WRITE button [UTILITY] UTILITY button • Reference such as (p. **) indicate pages in this manual to which you can refer. * All product names mentioned in this document are trademarks or registered trademarks of their respective owners. Owner’s Manual Thank you, and congratulations on your choice of the BOSS GT-6 Guitar Effects Processor. Before using this unit, carefully read the sections entitled: • USING THE UNIT SAFELY (page 2–3) • IMPORTANT NOTES (page 4) These sections provide import

Press PARAMETER [ ] a number of times until the User Phrase settings screen is displayed. 5. Press PARAMETER [ ] [ ] to move the cursor, then rotate the PATCH/VALUE dial to set the User phrase. Step Pitch Length Sound Attack * When you want to place the currently set step at the very end, turn the PATCH/VALUE dial clockwise in the settings screen for the step that follows it (it does not matter which parameter is selected), until “---” appears in the bottom row of the screen. STEP Sets the step

Ensure for safety reasons there is no possibility of secondary ploblems around the repaired spots. If extended damage is caused due to negligence of repair, the legal responsibility shall be with the repairing company. 4. Caution in removal and making wiring connection to the parts for the automobile. Disconnect the battery terminal after turning the ignition key off. If wrong wiring connections are made with the battery connected, a short circuit and/or fire may occur. If extensive damage is c