(Default value) Enabled Enable CPU fan fail warning function. -43 -BIOS Setup English CPU Smart FAN Control (Note) Disabled Disable this function. Enabled When this function is enabled, CPU fan will run at different speed depending on CPU temperature. Users can adjust the fan speed with Easy Tune based on their requirements. (Default value) CPU Smart FAN Mode This option is available only when CPU Smart FAN Control is enabled. Auto BIOS autodetects the type of CPU fan you installed and sets the
GA-K8NSC-939 Motherboard - 44 2-10 Set Supervisor/User Password CMOS Setup Utility-Copyright (C) 1984-2004 Award Software • Standard CMOS Features • Advanced BIOS Features • Integrated Peripherals • Power Management Setup • PnP/PCI Configurations • PC Health Status • MB Intelligent Tweaker(M.I.T.) Enter Password: Top Performance Load Optimized Defaults Set Supervisor Password Set User Password Saving ESC: Quit ........: Select Item F8: Q-Flash F10: Save & Exit Setup Change/Set/Disable Password W
-81 -Appendix English STEP 2: In the Audio Control Panel, click the Audio I/O tab. In the upper left list, click 8CH Speaker. STEP 3: After plugging in 8-channel speakers to the rear speaker jacks, a small window will pop up and ask you what type of equipment is connected. Choose a device depending on the type of speaker connected (8-channel audio consists of Front Speaker Out (Line Out), Rear Speaker Out, Center/ Subwoofer Speaker Out, and Side Speaker Out) then click OK. The 8-channel audio se
1 file(s) found 8KNXPU.Fba 512K Total size : 1.39M Free size : 911.50K F5 : Refresh DEL : Delete BIOS file in the floppy disk. After pressing Enter, you'll then see the progress of reading the BIOS file from the floppy disk. Dual BIOS Utility Boot From......................................... Main Bios Main ROM Type/Size.............................SST 49LF003A 512K Backup ROM Type/Size.........................SST 49LF003A 512K Wide Range Protection Disable Save Settings to CMOS Q-Flash Utility
(Default value) Disabled Disable onboard 1st channel IDE port. OnChip SATA Controller Enabled Enable onboard SATA function. (Default value) Disabled Disable onboard SATA function. OnChip SATA Type Native IDE Set the SATA channel to Native IDE mode.(Default value) RAID Set the SATA channel to RAID mode. Legacy IDE Set the SATA channel to Legacy IDE mode. SATA..AHCI Set the SATA channel to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage dr
39 2-5 PnP/PCI Configurations ................................................................................. 40 2-6 PC Health Status ........................................................................................... 41 2-7 Load Fail-Safe Defaults ................................................................................... 42 2-8 Load Optimized Defaults ................................................................................. 42 2-9 Set Supervisor/User Password ........
to Sat.
(Default value) Always Enable Onboard GPU will always be enabled whether there is a graphics card on the PCI Express slot or not. GA-K8N51GMF(-RH) Motherboard - 34 2-3 Integrated Peripherals EnglishCMOS Setup Utility-Copyright (C) 1984-2005 Award Software Integrated Peripherals ..SATAII RAID Config [Press Enter] On-Chip IDE Channel0 [Enabled] On-Chip IDE Channel1 [Enabled] IDE1 Conductor Cable [Auto] IDE2 Conductor Cable [Auto] Serial-ATA-II 1 [Enabled] On-Chip USB [V1.1+V2.0] USB Keyboard Suppo
(Universal Plus Dual Power System) The U-Plus Dual Power System (U-Plus DPS) is a revolutionary eight-phase power circuit built for ultimate system protection. Designed to withstand varying current levels and changes, the U-Plus D.P.S. provides an immensely durable and stable power circuit to the CPU for solid system stability. These characteristics make it the ideal companion with the latest LGA775 Intel® Pentium® 4 Processor as well as future Intel® processors. As well, 4 blue LED's are mounte
To connect an AC97 front panel audio module to this connector, please refer to the instructions on Page 76 about the software settings. HD Audio: AC'97 Audio: 2 1 10 9 Pin No. Definition 1 MIC 2 GND 3 MIC Power 4 NC 5 Line Out (R) 6 NC 7 NC 8 No Pin 9 Line Out (L) 10 NC Pin No. Definition 1 MIC2_L 2 GND 3 MIC2_R 4 -ACZ_DET 5 LINE2_R 6 FSENSE1 7 FAUDIO_JD 8 No Pin 9 LINE2_L 10 FSENSE2 GA-M61P-S3 Motherboard - 24 - English 11) CD_IN (CD In Connector) Connect CD-ROM or DVD-ROM audio out to the conn