Stimmen - 2, Durchschnittliche Bewertung: 3 ( )

Hersteller: AMD Dateigröße: 6.57 mb Dateiname: motherboard_manual_k8n51gmf-rh_e.pdf Unterrichtssprache:

(Default value) Always Enable Onboard GPU will always be enabled whether there is a graphics card on the PCI Express slot or not. GA-K8N51GMF(-RH) Motherboard - 34 2-3 Integrated Peripherals EnglishCMOS Setup Utility-Copyright (C) 1984-2005 Award Software Integrated Peripherals ..SATAII RAID Config [Press Enter] On-Chip IDE Channel0 [Enabled] On-Chip IDE Channel1 [Enabled] IDE1 Conductor Cable [Auto] IDE2 Conductor Cable [Auto] Serial-ATA-II 1 [Enabled] On-Chip USB [V1.1+V2.0] USB Keyboard Support [Disabled] USB Mouse Support [Disabled] Onboard Audio Function [Auto] Onboard LAN Function [Auto] Onboard LAN Boot ROM [Disabled] Onboard 1394 Function [Enabled] Onboard Serial Port 1 [3F8/IRQ4] Onboard Serial Port 2 [2F8/IRQ3] Onboard Parallel Port [378/IRQ7] Parallel Port Mode [SPP] ........: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F7: Optimized Defaults Item Help Menu Level.. SATAII RAID Config CMOS Setup Utility-Copyright (C) 1984-2005 Award Software SATAII RAID Config Item Help Menu Level.. SATA-II RAID function [Disabled] x SATA-II 1 Primary RAID Disabled x SATA-II 1 Secondary RAID Disabled ........: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults SATA-II RAID function Enabled Enable SATAII RAID function. Disabled Disable SATAII RAID function. (Default value) SATA-II 1 Primary RAID Enabled Enable SATAII 1 1st SATA RAID function. Disabled Disable this function. (Default value) SATA-II 1 Secondary RAID Enabled Enable SATAII 1 2nd SATA RAID function. Disabled Disable this function. (Default value) -35 -BIOS Setup English On-Chip IDE Channel0 Enabled Enable onboard 1st channel IDE port. (Default value) Disabled Disable onboard 1st channel IDE port. On-Chip IDE Channel1 Enabled Enable onboard 2nd channel IDE port. (Default value) Disabled Disable onboard 2nd channel IDE port. IDE1 Conductor Cable Auto BIOS autodetects IDE1 conductor cable .(Default Value) ATA66/100/133 Set IDE1 Conductor Cable to ATA66/100/133 (Please make sure your IDE device and cable are compatible with ATA66/100/133). ATA33 Set IDE1 Conductor Cable to ATA33. (Please make sure your IDE device and cable are compatible with ATA33) IDE2 Conductor Cable Auto BIOS autodetects IDE2 conductor cable. (Default Value) ATA66/100/133 Set IDE2 Conductor Cable to ATA66/100/133. (Please make sure your IDE device and cable are compatible with ATA66/100/133) ATA33 Set IDE2 Conductor Cable to ATA33. (Please make sure your IDE device and cable are compatible with ATA33) Serial-ATA-II 1 Enabled Enable Serial-ATAII 1 support. (Default Value) Disabled Disable Serial-ATAII 1 support. On-Chip USB V1.1+V2.0 Enable USB 1.1 and USB 2.0 controllers. (Default Value) V1.1 Enable only USB 1.1 controller Disabled Disable onchip USB support. USB Keyboard Support Enabled Enable USB keyboard support. Disabled Disable USB keyboard support. (Default value) USB Mouse Support Enabled Enable USB mouse support. Disabled Disable USB mouse support. (Default value) Onboard Audio Function Auto Auto-detect onboard audio function. (Default value) Disabled Disable this function. Onboard LAN Function Auto Auto-detect onboard LAN chip function.(Default value) Disabled Disable onboard LAN chip function. Onboard LAN Boot ROM This function decide whether to invoke the boot ROM of the onboard LAN chip. Enabled Enable this function. Disabled Disable this function. (Default value) GA-K8N51GMF(-RH) Motherboard - 36 English Onboard 1394 Function Enabled Enable onboard IEEE1394 function.(Default value) Disabled Disable onboard IEEE1394 function. Onboard Serial Port 1 Auto BIOS will automatically setup the port 1 address. 3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8/IRQ4. (Default value) 2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8/IRQ3. 3E8/IRQ4 Enable onboard Serial port 1 and address is 3E8/IRQ4. 2E8/IRQ3 Enable onboard Serial port 1 and address is 2E8/IRQ3. Disabled Disable onboard Serial port 1. Onboard Serial Port 2 Auto BIOS will automatically setup the port 2 address. 3F8/IRQ4 Enable onboard Serial port 2 and address is 3F8/IRQ4. 2F8/IRQ3 Enable onboard Serial port 2 and address is 2F8/IRQ3.(Default value) 3E8/IRQ4 Enable onboard Serial port 2 and address is 3E8/IRQ4. 2E8/IRQ3 Enable onboard Serial port 2 and address is 2E8/IRQ3. Disabled Disable onboard Serial port 2. Onboard Parallel Port Disabled Disable onboard LPT port. 378/IRQ7 Enable onboard LPT port and address is 378/IRQ7. (Default value) 278/IRQ5 Enable onboard LPT port and address is 278/IRQ5. 3BC/IRQ7 Enable onboard LPT port and address is 3BC/IRQ7. Parallel Port Mode SPP Using Parallel port as Standard Parallel Port. (Default value) EPP Using Parallel port as Enhanced Parallel Port. ECP Using Parallel port as Extended Capabilities Port. ECP+EPP Using Parallel port as ECP and EPP mode. -37 -BIOS Setup English 2-4 Power Management Setup CMOS Setup Utility-Copyright (C)...

Herunterladen

Geben Sie zwei Ziffern: