Estimated length of cable is 30 feet (9 meters) although this is dependent upon distance from the splice enclosure. Page 48 © 2007, ADC Telecommunications, Inc. ADCP-75-210 ♦ Issue 1 ♦ March 2007 ^ Note: The fiber should not have armored jacketing which may be a source for ElectroMagnetic Interference (EMI). 2. Install the compression nut and an appropriate sized split ring and bushing over the cable end. Note that the beveled side of the split ring should face toward the compression nut.

6. Click Add Rule to include your rule to the list that displays in the pull-down menu. Modify a Rule After a rule is added, it can later be modified. To make changes to a rule: 1. Select the rule from the Current Rules pull-down menu. 2. Modify settings for library groups and categories in the Rule Details frame. 3. Click Save Rule. Copy a Rule As a time saving practice, a rule can be used as a basis when creating another similar rule. To copy a rule: 1. Select the rule to be copied from the li

3. In the Domain Controller field, enter the name of the authentication server for the domain. 4. Enter the domain controller’s IP Address. 5. In the UserName field, enter the username of the administrator. 6. Enter the password in the Password and Confirm Password fields. 8E6 TECHNOLOGIES, R3000 ENTERPRISE FILTER AUTHENTICATION USER GUIDE CHAPTER 3: NT AUTHENTICATION SETUP CREATE AN NT DOMAIN 7. Click Apply to add the domain to the tree. Refresh the NT branch Click NT in the control panel to o

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v GENERALSAFETYPRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v STANDARDS CERTIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .vi LIST OFACRONYMS ANDABBREVIATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

FPL Series Termination/Splice Panel User Manual) INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Trademark Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

18221-A ADCP-75-169 • Issue 1 • June 2004 18824-A Figure 4. Expansion Panel 3.2 Wavelength Division Multiplexer System The Wavelength Division Multiplexer (WDM) system is an accessory product that is used when it is desirable or necessary to combine the forward and reverse path optical signals from one Digivance system onto a single optical fiber. Each WDM system consists of a host module and a remote module. The HU provides a mounting slot for installing a WDM host module. Both the RU outdoor c

No right, license, or interest to such trademarks is granted hereunder, and you agree that no such right, license, or interest shall be asserted by you with respect to such trademark. Information contained in this document is company private to ADC DSL Systems, Inc., and shall not be modified, used, copied, reproduced or disclosed in whole or in part without the written consent of ADC. Other product names mentioned in this practice are used for identification purposes only and may be trademarks

Configure default gateway screen A. At the Enter default gateway IP field, enter the IP address for the default gateway. Press Enter to display the confirmation prompt. B. Press Y for “Yes” to confirm and save your entry for the gateway IP address, and to go to the Configure Domain Name Servers screen. Configure Domain Name Servers screen A. At the Enter first DNS server IP field, enter the IP address for the primary Domain Name Server. Press Enter to go to the next screen. B. At the Enter (opti

The ER is designed to readily obtain information about end users’ Internet activity via log files (text files containing Web access data) from a source device such as the 8e6 R3000 Enterprise Filter. ER “H” server models include RAID technology for fault tolerance and high performance. The ER is comprised of the ER server and client application. Once the ER server is configured and log files have populated the database, an administrator can use the ER client reporting application to virtually ge