6. {Clear/Stop}key Press to delete a number you have entered. User Tools (System Settings) Accessing the User Tools (System Settings) This section is for the key operators in charge of this machine. You can change or set the machine's default settings. Preparation After using the User Tools, be sure to exit from the User Tools. The selected key is highlighted. Any changes you make with the User Tools remain in effect even if the main power switch or operation switch is turned off, or the {Clear

Directional Magnification (%) Directional Magnification (%) Copies can be reduced or enlarged at different reproduction ratios horizontally and vertically. a% b% CP2P01EE Note r The following ratios can be selected: • Metric version: 25 – 400% • Inch version: 25 – 400% . You can select a ratio regardless of the size of an original or copy paper. With some ratios, parts of the image might not be copied or blank margins will appear on copies. . You can also select a preset ratio which is close to

B BBBBPress the [Specifd. Ratio] key. C CCCCMake sure the [Size Magnification] key is highlighted. D DDDDEnter the length of the original with the number keys, and then press the [#] key. Note . You can enter sizes within the following ranges. pressing the [#] key, select [Original] or [Copy] and enter the desired length. F FFFFPress the [OK] key. G GGGGPress the [OK] key. H HHHHPlace your original, and then press the { {{{{Start} }}}} key. Directional Magnification (%) Copies can be reduced or

. Copies are delivered face down. - ----How to Operate . ....To stop the machine during a multi- copy run. .Press the { {{{{Clear/Stop} }}}} key. . ....To return the machine to the initial condition after copying. .Press the { {{{{Clear Modes} }}}} key. . ....When clearing entered values. .Press the { {{{{Clear/Stop} }}}} key or the [Clear] key on the display. . ....To confirm settings. .Press the { {{{{Check Modes} }}}} key. Copying Auto Start Copy starts automatically when the machine is ready

. Pressing the {Check Modes} key on the control panel lets you check the list of selected destinations. Checking selected destinations A Use the destination field at the top of the screen to check which destinations are selected. Note . When multiple destinations are selected, the selected destinations are displayed in the order they were selected by pressing [UPrev.] or [T Next]. . Pressing the {Check Modes} key on the control panel lets you check the list of selected destinations. G Specify th

If removed, this will result in data being permanently lost. _(£) WARNING: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction ma

53 From 1 Two-sided Original To 2 One-sided Copies (2 Sided Original)......55 From 2 Facing Pages To 2 One-sided Copies (Book Original)..................56 ADDING OR INSERTING SHEETS (Cover/Slip Sheet)............................58 Copying The Front Cover Of The Originals (Copy Cover)...............................................................................................58 Copying The Front And Back Covers Of The Originals..............................59 Adding A Front Cover Sheet

250-sheet tray *11. Unit for two-sided copying 12. Main switch 13. Copy tray 14. Toner Bottle 15. Fusing Unit Operator controls and indicators are located here. Use to align originals on the exposure glass. Lower this cover over originals for copying. Position originals here face down for copying. Use to copy onto OHP sheets, adhesive labels, translucent paper, and post cards. This tray can hold 1,000 sheets of copy paper. One of two models have this tray. (m- See page 2.) Insert the

For safety, please follow the instructions in this manual. Fax Option Type 1027 Operating Instructions Fax Option Type 1027 Operating Instructions Paper type: OK Prince Eco G100( 55kg) , Paper Thickness= 80 .m / / Pages in book= 212 / / Print scale= 81% Gap ( when printed at 81% scale) = Pages in book . Paper thickness / 2 = 8.480000 mm Introduction This manual contains detailed instructions on the operation and maintenance of this machine. To get maximum versatility from this machine all operat

Combination of original and copy paper is not correct. Select A3L for A4 K originals and A4 for A5 originals. In Border, Centre, or Centre/ Border mode, parts of the original image are not copied. You set a wide erased margin. Make the margin width narrower. You can adjust it between 2–99 mm (0.1"–3.9"). See p.96 “Erase Border Width”and p.96 “Erase Centre Width”. Originals are not scanned correctly. Place the originals correctly. In Margin Adjustment mode, parts of the original image are not cop