Login:

RIDGID 5228/530

heruntergeladen wurde: 0Dateigröße: 70 kb    Hersteller: RIDGID  
Kategorie: Kreissägen

RIDGID RT-175 196

heruntergeladen wurde: 1Dateigröße: 250 kb    Hersteller: RIDGID  
Kategorie: Lötlampen

Catalog Sheet No. RT-175-96 Effective Date January 1, 1996 Model RT-175 Electric Soldering Gun The safer, flameless alternative to torches - The new RT-175 Electric Soldering Gun is a lightweight, rugged electric soldering gun that sweats joints on copper tube up to 3". The RT-175 will operate on a standard 115V, 15 AMP outlet. There is no open flame to worry about igniting wallboard, insulation, or studs and joists in the walls. Simply place the carbon tips on the copper fitting and remove

RIDGID 2048-OS

heruntergeladen wurde: 1Dateigröße: 263 kb    Hersteller: RIDGID  
Kategorie: Andere Home Zubehör

–ATTENTION– Read and understand all instructions and warnings before operating or using this product. –NOTICE– Any modification or unintended use of this product shall immediately void all manufacturers warranties. Manufacturer disclaims all liability for injuries to persons or property resulting from any modification to, or unintended use of this product. PADLOCK INSTALLATION INSTRUCTIONS FOR ALL UNITS U-Bolt 7/8"-1" Figure 3 (measure height when lock is closed) Lock Shackle Figure 1 Figure 2 T

RIDGID 3068-OS

heruntergeladen wurde: 4Dateigröße: 263 kb    Hersteller: RIDGID  
Kategorie: Andere Home Zubehör

Terra. Cotta Ave., Crystal Lake, Illinois to the original retail purchaser of RIDGID® Storage Products. RIDGID STORAGE EQUIPMENT WARRANTS THAT RIDGID ON-SITE STORAGE EQUIPMENT WILL BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP FOR A PERIOD OF THREE (3) YEARS FROM DATE OF PURCHASE BY THE ORIGINAL RETAIL PURCHASER. THIS WARRANTY IS SPECIFIC TO THIS STORAGE EQUIPMENT. WARRANTIES FOR OTHER RIDGID PRODUCTS MAY VARY. If, before the expiration of the Warranty period, purchaser discovers that this RI

RIDGID 204830-OS

heruntergeladen wurde: 0Dateigröße: 263 kb    Hersteller: RIDGID  
Kategorie: Andere Home Zubehör

Securing shelf for transport: 1. To minimize movement during transport, make sure the shelf front is located behind the stop tabs on each side of the box. 2. Once the box is on-site the shelf can be moved forward by slightly lifting the front edges over the stop tabs. The shelf bottom should always lie flat on the runners when finished adjusting the shelf. "RapidPassThru"-1.eps STOP TAB HAND TOOL STORAGE SCREWDRIVER Figure 8 TO INSTALL RAPID PASS™ GROMMET (Model 2048-OS and Model 204830-OS) TOOL

RIDGID 2032-OS

heruntergeladen wurde: 0Dateigröße: 263 kb    Hersteller: RIDGID  
Kategorie: Andere Home Zubehör

• Gasoline, solvents, gun powder or other munitions, dynamite, propane, acetylene or other such products can explode if stored inside these products. • Use these products ONLY for storing and transporting electric or hand tools and equipment, and other similar materials. • Failure to follow these warnings or modifications or other uses of these products could result in death, serious injury or property damage. WARNING For Models 2048-OS and 204830-OS: To prevent electric shock, explosion, fire a

RIDGID TP1300

heruntergeladen wurde: 48Dateigröße: 267 kb    Hersteller: RIDGID  
Kategorie: Jack Planes

SP6393 PrintedinTaiwan RepairParts Parts List for 13" Thickness Planer Model No. TP13001 RIDGID parts are available on-line at Figure 1 Always order by Part Number -Not by Key Number * Standard Hardware Item -May be purchased locally. † These replacement parts are available where you purchased your Planer. 1 2 3 6 7 8 910 11 12 13 14 15 16 17 18 19 20 5 4 11 21 15 23 Key No. Part No. Description 1 2 3 4 5 6 7 8 9 10 11 12 827808 820240-7 827689 827740 827890 827809 827811 827810 821065-3 826463-

RIDGID K6200

heruntergeladen wurde: 1Dateigröße: 288 kb    Hersteller: RIDGID  
Kategorie: Musikinstrumente

RIDGID Screwdriver

heruntergeladen wurde: 8Dateigröße: 397 kb    Hersteller: RIDGID  
Kategorie: Bohrmaschinen und Schrauber

R-04-E Effective Date: June 1, 2004 Visit us on the Internet: Tools for the Professional New! 6-in-1 Multi-Purpose Screwdriver Introducing the new 6-in-1 Screwdriver as the one screwdriver you need to have in your tool box or your tool belt. This multi-purpose tool is designed for a variety of uses and is produced to the same exacting detail and superior quality as all RIDGID tools. The tool provides a #1 and #2 Phillips tip, a 716" and 1A" flat tip, plus a and V4" nut driver built right in

RIDGID R3001

heruntergeladen wurde: 0Dateigröße: 415 kb    Hersteller: RIDGID  
Kategorie: Kreissägen

Make sure hidden electrical wiring, water pipes, and mechanical hazards are not in the blade path when cutting into a wall. GENERAL CUTTING See Figure 5. Hold the saw firmly in front of and clearly away from you. Make sure saw blade is clear of any foreign material. Be sure material to be cut is held firmly. Small workpieces should be securely clamped in a vise or with clamps to the work bench or table. n Mark the line of cut clearly. n Pull variable speed switch to start the cutting action. n P





Kategorien