Shindaiwa recommends that the unit be returned to your Shindaiwa dealer for service. WARNING Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service. Wear gloves to protect hands from sharp edges and hot surfaces. maint

Always wear eye and hearing protection when operating this unit. WARNING! Part Number 82050 Rev. 6/08 English Introduction The Shindaiwa EB633RT Blower is designed and built to deliver superior performance and reliability without compromise to quality, comfort, safety, or durability. Shindaiwa high performance engines represent the leading edge of 2-cycle engine technology, and deliver exceptionally high power at remarkably low displacement and weight. As a professional owner/operator, you’ll so

....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................

When they are dogged with chips, remove them. For dwtributton of wear (and increased life), оссааюпаву turn bar cover. 3. Air Cleaner— a) Remove the air cleaner, being careful not to drop dust in the carburetor. Make sure the choke lever Is puled when removing the air cleaner. b) Dust tends to accumulate on the bottom surface. c) Rinse the air cleaner with gasoline or solvent When blowing with air, blow from the upper side. 4. Periodical Inspection and Maintenance— Cylinder Fin Cleaning.

082672-6001 11975 S.W. Herman Road, Tualatin, Oregon 97062 (U.S.A) Phone: 503-692-3070 TU : 910-466-8550 SDKUSAWLSV FAX : 503-692-6696 Printed in Japan 72338-93110 (1-9303) ® shtadaiwa 757 757C 757W CHAIN SAW ■* ^ ***** This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. OWNER’S MANUAL FOR YOUR OWN SAFETY, CAREFULLY READ THIS OWNER’S MANUAL BEFORE USE. CAUTION: Always wear eye protection when operating this machine. A Your Shindaiwa 757/757C

chain and saw combination. NOTE: The reduce the risk of kickback, all of the above must be in good repair. Use of other than ANSI B175.1 combinations may produce much greater kickback energy. Warning: This chain saw is capable of severe kickback that could resuit in serious injury to the user. Do not operate this chain saw unlese you have extraordinary cutting needs and experience and specialized training for dealing with kickback. Chain saws with significantly reduced kickback potential a

A contaminated fuel filter should be replaced with a new Shindaiwa replacement element. Before reinstalling the filter, inspect the condition of the fuel line. If you note damage or deterioration, the blower should be removed from service until it can be inspected by a Shindaiwa- trained service technician. COOLING SYSTEM Use a wood or ¦¦ plastic scraper and a soft brush to remove dirt and debris from the cylinder fins and crankcase. Hooked Wire Fuel Filter SPARK PLUG Replace the spark plug ¦¦ w

NOTE: A statement preceded by the word “NOTE” contains information that is handy to know and may make your job easier. Safety and operation labels Read and follow this manual. Failure to do so could result in serious injury. Wear eye and hearing protection at all times during the operation of this unit. Keep hair and loose clothing clear of the air inlet. This unit is intended for outdoor use only and should be used only in well ventilated areas. 3 General Safety Instructions Work Safely Blowers

If any binding is present, loosen 102mm clamp and pull wire towards engine to get more slack and recheck for free movement. Swivel Tube Align the lock pins with the lock slots, and push the tube and nozzle together. Static Wire Fold wire Lock Pin Lock Slot Rotate clockwise to lock making sure the 3 lines are aligned on both tube and nozzle. Flexible Tube Static Wire Connector Figure 5 Figure 6 IMPORTANT! Blower tube installation affects blower performance! Make sure the tubes and nozzle are corr

No. 665871SDKHIR 11975 S.W. Herman Road, Tualatin, Oregon 97062 (U.S.A) Phone: 503-692-3070 TLX : 910-466-8550 SDKUSAWLSV FAX : 503-692-6696 400 This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. CHAIN SAW OWNER’S MANUAL FOR YOUR OWN SAFETY, CAREFULLY READ THIS OWNER’S MANUAL BEFORE USE. CAUTION: Always wear eye protection when operating this machine. A Your Shlndaiwa 400 Is equipped with spark arrestor mufflers. Do not run machine without spar