To utilize these options: • To REPEAT an imprint with the same number, flip the switch to the UP position. • To ADVANCE the numbering wheels, press and hold the switch and press the Manual Registration Button to advance one number at a time. Continue pressing until the desired number is reached. • Return the switch to the CENTER position for normal operations. Figure 5 9 - LT Series Operations Manual CONSECUTIVE/DUPLICATE COUNT (Numbering Units) Units equipped with the numbering feature may be c

It has been tested and found to comply with the limits for a Class A computing devise pursuant to Subpart J of part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of the equipment in a residential area is likely to cause interference, in which case, the user, at his own expense, will be required to take whatever measures may be required to correct the interference. This document is a confidential

7. Make a sample registration. If the registration is not in the desired location, readjust the trigger assembly by following the previous six steps. If the registration is in the desired location, reset the type wheels (see Setting the Type Wheels, Page 6) and the digital display (Setting the Digital Display, Page 7). 11 -LT Series Operations Manual CHANGING THE RIBBON LT Series time stamps use a silk ribbon for long-lasting, high-quality imprints. To avoid damaging the unit, use only a #20-S r

4. Depress the time type setting lever (Figure 2, Number 4). Using a small screwdriver or similar tool, rotate each individual date and time type wheel down to the correct date and time. (Note: Month and date type wheels must be reset manually the first day of each month.) 5. Depress the number type setting lever (Figure 2, Number 5) and rotate the number type wheels (Figure 2, Number 6) to the correct position. 6. Close the top frame and insert the locking pin, positioning the pull ring down an

LT SERIES User’s Manual 1 -LT Series Operations Manual TABLE OF CONTENTS Specifications.......................................................................2 Introduction..........................................................................3 LT Series Models.................................................................4 Optional Features.................................................................4 Getting Started .....................................................................

(For jumper/shunt selection, see page 9, "Consecutive / Duplicate Count.") OPTIONAL FEATURES REPEAT/ADVANCE SWITCH Overrides automatic numbering advance to allow repeating the same number if desired, or advances to a higher number. (See page 8 for operating instructions.) INSCRIPTION PLATES The die plates may be permanently fixed or removable. They can have up to 3 lines of 20 characters per line, or carry facsimile signatures. (Note: Removable die plates must be removed before opening top frame

Type wheels must be advanced manually. Year wheels carry ten (10) years. LTN Registers consecutive numbers. Basic unit includes six (6) numbering wheels which advance automatically. Up to five additional numerical, letter, or code wheels may be purchased. The additional wheels must be advanced manually. (Note: The manual registration button is standard on this module.) LTT(C) Registers time, date, month, and year. Type wheels advance automatically. Month and date wheels must be reset manually th

Do not put a heavy object on the time recorder, or forcefullypress the time recorder onto the back-plate. This may cause trouble with the punching mechanism. Lithium battery contains perchlorate material – special handling may apply. Please go to the web site for information about proper methods of disposal. About this Manual This manual will guide you through the installation, set up and use of your 800P TruAlign Time Recorder. Optional Accessories . E8-100 Weekly timecard for the 800P (pack of

17:30 • Up to 48 programs can be set (Program No. 1 through No. 48). 1 Press the [SELECT] button and position the " " over the "TIME TABLE PROGRAM" mark. At that moment, the flashing digit indicates the "Program No.". (The flashing means it can be changed.) 2 Setting program No. 1 (1) Set the "Day of the week". Press the [SET] button. At that moment, the flashing changes from the "Program No." to the "Day of the week". In case of example, press the [CHANGE] button to set at "9". And then press t

Shouldyou ever need assistance, please let us know. This guide contains all the information you need for setting up and operating your new time recorder. Service information isalso included for replacing certain parts. OrderingAccessories .............................................1 Start Here..........................................................2 1. Mount Clock in Suitable Location ...........................2 2. Unlock and Remove the Cover...............................2 3. Liftthe Type