B - Includes (1) Valve, (2) Tie Wraps, (1) 6" Tubing and (1) 3" Tubing. C - Includes (1) Valve, (2) Tie Wraps, (1) 12-3/4" Tubing and (1) 1-3/4" Tubing. D - Includes items 7-9 E - Includes items 11 and 12. Kit accommodates (1) Sieve Bed F - Includes (1) Valve, 4-Way with Screws, (1) Pilot Valve O-Ring, (1) Air Manifold, (1) Operator Pilot Low Power Valve G - Includes the 4-Way Valve with Screws only H - A new Pilot Valve O-Ring Part #1085112 is recommended when ordering a new Operator Pilot Low

USER: BEFORE using this bed, read this manual and save for future reference. For more information regarding Invacare products, parts, and services, please visit Bariatric Bed BAR750 WARNING DO NOT OPERATE THIS EQUIPMENT WITHOUT FIRST READING AND UNDERSTANDING THIS MANUAL. IF YOU ARE UNABLE TO UNDERSTAND THE WARNINGS, CAUTIONS, AND INSTRUCTIONS, CONTACT A HEALTHCARE PROFESSIONAL, DEALER OR TECHNICAL PERSONNEL IF APPLICABLE BEFORE ATTEMPTING TO USE THIS EQUIPMENT - OTHERWISE INJURY OR DAMAGE MAY

These high-quality lifts are comfortable, reliable and integral tools for staff and caregivers. Using the lift for patient handling can help reduce staff injuries, save you money and reinforce safety as a priority in your health care facility. Invacare Reliant lifts support up to 450 pounds,making potentially challenging transfers smooth for the resident and caregiver. The high lift range allows easy access to tubs, chairs, commodes, floors and beds (with at least 4.5" under-bed clearance). Alon

BEFORE using this product, read this manual and save for future reference. © 2011 Invacare Corporation. All rights reserved. Republication, duplication or modification in whole or in part is prohibited without prior written permission from Invacare. Trademarks are identified by ™ and ®. All trademarks are owned by or licensed to Invacare Corporation or its subsidiaries unless otherwise noted. Invacare®MA80 Series Mattresses 2 Part No 1148138 CONTENTS 1 GENERAL 4 Symbols .........................

Mattress MUST fit bed frame and side rails snugly to prevent patient entrapment. Follow the manufacturer’s instructions. Monitor patient frequently. Read and understand the Owner’s/Operator’s Manual prior to using this equipment. Invacare product manuals are available at or your dealer. • Refer to the instructions provided with the side rails for the installation procedure. Part No 1148138 15 Invacare®MA80 Series Mattresses 4 OPERATION 4.3 Installing the Control Unit Bed Hook 1. Pull out the bed

Back Cane Adjustment Screw Arm Tube Cantilever Arm Armpad FIGURE 8.5 Adjusting the Angle of the Cantilever Arms Installing/Removing the Cantilever Arm Armpad NOTE: For this procedure, refer to FIGURE 8.6. NOTE: Reverse this procedure to remove the cantilever arm armpad. Secure the new armpad to the cantilever arm tube with two screws. Cantilever Arm Tube Cantilever Arm Armpad Screws FIGURE 8.6 Installing/Removing the Cantilever Arm Armpad Part No 1143238 47 Adjustable ASBA Seat SECTION 9—ADULT B

Invacare product manuals are available at or your dealer. • Refer to the instructions provided with the side rails for the installation procedure. 4.3 Installing the Power Unit Bed Hook 1. Pull out the bed hook on the back of the control unit. 2. Place the control unit on the footboard. If the bed does not have a footboard, place the • control unit on a flat surface, leaving room for the hose to hang down. FIGURE 2 Installing the Power Unit 4.4 Connecting the Hose CAUTION . Ensure that the hose