ORDER NO. DESCRIPTION M. R109 7030003370 S.RESISTOR ERJ3GEYJ 271 V (270 .) T R110 7030003370 S.RESISTOR ERJ3GEYJ 271 V (270 .) T R111 7030003370 S.RESISTOR ERJ3GEYJ 271 V (270 .) T R112 7030003370 S.RESISTOR ERJ3GEYJ 271 V (270 .) T R113 7030003370 S.RESISTOR ERJ3GEYJ 271 V (270 .) T R114 7030003280 S.RESISTOR ERJ3GEYJ 470 V (47 .) T R115 7030003280 S.RESISTOR ERJ3GEYJ 470 V (47 .) T R116 7030003440 S.RESISTOR ERJ3GEYJ 102 V (1 k.) T R117 7030003490 S.RESISTOR ERJ3GEYJ 272 V (2.7 k.) T R118 7030

USA IC-M802 Canada CAN Other OTH To upgrade quality, any electrical or mechanical parts and internal circuits are subject to change without notice or obligation. NEVER connect the transceiver to an AC outlet or to a DC power supply that uses more than 16 V. This will ruin the transceiver. DO NOT expose the transceiver to rain, snow or any liquids. DO NOT reverse the polarities of the power supply when connecting the transceiver. DO NOT apply an RF signal of more than 20 dBm (100 mW) to the anten

This manual contains important safety and operating instructions for the IC-718. PRECAUTIONS RWARNING HIGH VOLTAGE! NEVER attach an antenna or internal antenna connector during transmission. This may result in an electric shock or burn. RNEVER apply AC to the [DC13.8V] jack on the transceiver rear panel. This could cause a fire or ruin the transceiver. RNEVER apply more than 16 V DC, such as a 24 V battery, to the [DC13.8V] jack on the transceiver rear panel. This could cause a fire or ruin the

VERSION SYMBOL #02 Europe EUR #04 Australia AUS #06 U.S.A. USA-1 #07 Korea KOR NEVER connect the transceiver to an AC outlet or to a DC power supply that uses more than 16 V. This will ruin the transceiver. DO NOT expose the transceiver to rain, snow or any liquids. DO NOT reverse the polarities of the power supply when connecting the transceiver. DO NOT apply an RF signal of more than 20 dBm (100 mW) to the antenna connector. This could damage the transceiver’s front end. To upgrade quality, an

Such a connection could cause a fire hazard and/or electric shock. DO NOT expose the transceiver to rain, snow or any liquids. DO NOT reverse the polarities of the power supply when connecting the transceiver. DO NOT apply an RF signal of more than 20 dBm (100mW) to the antenna connector. This could damage the transceiver's front end. ORDERING PARTS Be sure to include the following four points when ordering replacement parts: 1. 10-digit order numbers 2. Component part number and name 3.

not included) 54(W) x 132(H) x 35(D) mm; 25/32(W) x 5316(H) x 138(D) inch Weight (with BP-209) 355 g; 12.5 oz TRANSMITTER Output power High 4 W Low 1 W Modulation system Variable reactance frequency modulation Max. freqequency deviation ±5.0 kHz (W-type), ±4.0 kHz (M-type)*3, ±2.5 kHz (N-type) Spurious emissions 0.25 pW @ < 1 GHz, 1.0 pW @ < 1 GHz 73 dBc typical Adjacent channel power 70 dB (W/M-type) 60 dB (N-type) 70 dB typical (25 kHz) 60 dB typical (12.5 kHz)

• One of either “C1” to “C6” blinks. e Push [ Y YY] (or [ Z ZZ]) to scroll the message. • Push [ Z ZZ] or [ Y YY] to move the cursor to left or right, respectively. r Push [.• ENT ] (or [D• CLR] ) to exit OPTION SET MODE. ¦ ¦ A GPS receiver (RS-232 output/format/4800 bps) can be connected to [DATA] jack of the IC-V82/U82 to indicate current position (Latitude and The position data can also be transmitted with a message D DD Position indication q While connected to a GPS receiver, push [A• FUNC]

Therefore, some tone frequencies interference from adjacent tone frequencies. To prevent interference from adjacent tone using the frequencies as in the following table, mended. • Recommended CTCSS frequencies (Unit: Hz) 67.0 69.3 71.9 74.4 77.0 79.7 82.5 85.4 88.5 91.5 94.8 97.4 100.0 103.5 107.2 110.9 114.8 118.8 123.0 127.3 131.8 136.5 141.3 146.2 151.4 156.7 162.2 167.9 173.8 179.9 186.2 192.8 203.5 210.7 218.1 225.7 233.6 241.8 250.3 • Recommended DTCS codes 023 051 114 143 174 251 315 371

5 C28 4030016930 S.CER ECJ0EB1A104K T ?9.3/?.6 C29 403001?460 S.CER ECJ0EB1E102K T ?9/13.6 C30 4030016930 S.CER ECJ0EB1A104K T ?8.1/13.6 C31 403001?460 S.CER ECJ0EB1E102K T 80.6/51.? C32 403001?500 S.CER ECJ0EC1H560J B 33.3/15.9 C33 4030016930 S.CER ECJ0EB1A104K B 34.8/12.8 C34 403001?5?0 S.CER ECJ0EC1H040B B 32.1/15.4 C35 403001?590 S.CER ECJ0EC1H0?0C B 30.9/15.9 C36 4030016930 S.CER ECJ0EB1A104K T 22.4/14.9 C3? 403001?360 S.CER ECJ0EC1H030B B 28.3/15.4 C38 4030016930 S.CER ECJ0EB1A1

7 k) B 49.3/52 7 - 3 M.=Mounted side (T: Mounted on the Top side, B: Mounted on the Bottom side) S.=Surface mount [MAIN UNIT] REF ORDER DESCRIPTION M. H/V NO. NO. LOCATION R221 ?030005050 S.RES ERJ2GEJ 103 X (10 k) B 44.4/49.8 R222 ?0300050g0 S.RES ERJ2GEJ 104 X (100 k) B 1?.?/33.9 R223 ?0300050g0 S.RES ERJ2GEJ 104 X (100 k) B 16.2/33.9 R224 ?030005050 S.RES ERJ2GEJ 103 X (10 k) B 157/327 R225 ?030005000 S.RES ERJ2GEJ 4?1 X (4?0) B a/1g.2 R226 ?030004ga0 S.RES ERJ2GEJ 101 X (