. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB61 GB6 User’s Manual 1. Before Using the Product 1. Before Using the Product This chapter provides detailed instructions on the product and its accessories. 1.1 Package Contents Please check all package contents before using your product. User’s Manual Remote Control User’s Manual Batteries SCART Cable Note: • Faults may occur if the remote control is left without a battery for a long time. Always keep the battery inserted
Diese Taste hat die gleiche Funktion wie die GRUNE Taste in den Menus. Der Modus "Programm laden" unterstutzt keinen Tonspur. UNTERTITEL(GELB) Mit dieser Taste konnen Sie die Sprache der Untertitel fur das aktuelle Programm aufrufen. Diese Taste hat die gleiche Funktion wie die GELBE Taste in den Menus. Der Modus "Programm laden" unterstutzt keine Untertitel. UHF(BLAU) (UHF - Ultrahigh Frequency; ultrahohe Frequenz) Mit dieser Taste konnen Sie das Menu UHF einstellen. Diese Taste hat die gleiche
And The sub-group of Satellite and Scramble channel list may exist or not depending on the result of Channel Search. • If Within the current channel list option is selected from MENU - Edit channels - Channel Change Mode menu, you can only change programme within the selected channel list using the CH-/CH+ while your watching a programme. 5.3 Edit Channels You can edit all channels or each channel by channel list group. 1. Press the MENU button. 2. Select Edit Channels using the button, and pres
OK Mit dieser Taste konnen Sie die Kanalliste anzeigen. Diese Taste wird verwendet, um ein Element im Menu auszuwahlen. P+/P- Programmtasten +/-. Mit diesen Tasten konnen Sie das nachste oder das vorhergehende Programm einstellen. HILFE Mit dieser Taste konnen Sie die Hilfebox auf dem Bildschirm aufrufen. EPG Die EPG-Taste (EPG - Electronic Programme Guide; elektronische Programmanleitung) zeigt die TV/Radio-Programmanleitung an. RECALL (Ruckruf) Mit dieser Taste konnen Sie den vorher angesehene
Installation GB59 10.1 Channel Search 10.2 Linear Search 10.3 Default Setting GB59 GB62 GB64 11. Software Update GB65 11.1 OTA (Over the Air) GB65 12. System Information GB68 12.1 Status 12.2 Signal Detection 12.3 Conditional Access (for Conax embedded) GB68 GB68 GB69 13. Games GB70 14. Menu Map 15. Troubleshooting GB71 GB72 15.1 Troubleshooting 15.2 Error Message GB72 GB73 16. Specification 17. Glossary 18. Service and Support GB74 GB76 GB77 GB 7 1. Before Using the Recorder 1.3 Rear Panel 1. C
To do this, you must access the Satellite Settings menu. Do as follows ; 1. Select Service Searching from the Main Menu and press the OK button, to display the Service Searching menu. 2. Select the Manual Search option and press the OK button, to display the Manual Search menu. 3. Select the Antenna Alternative option and press the OK button, to display the Satellite Settings menu. 4. In the Satellite Settings menu ensure that you have DiSEqC Command Mode option set to User. 5. Highlight the opt
The following options are available on the Satellite Setting menu. Satellite Name A selection of satellite names that can be used to identify a motor position. If the satellite name you require is not available, please use other. In installer mode the Satellite Name Reference refers to the 0 position of the motor. Movement In user mode this is used to fine-tune the position of the motor for better reception. In Installer mode this is used to search for the position of a satellite manually. Motor
4. Press the EXIT button to cancel the deletion. . Move 1. Press the GREEN( )button to move the service to where you want to locate. Then, the icon( ) will be displayed in front of the service number. 2. Use the buttons to select a new location. 3. Press the OK button to fix the location. 4. Press the EXIT button to return to the original location. . Lock 1. Press the YELLOW( Then, the symbol . service name. . Skip 1. Press the BLUE( Then, the symbol . service name. buttons. )button to lock serv
2. Connect DiSEqC 1.2 Please refer to page GB39. The Locking Time might take longer than expected during the initial boot if the motorised system is set .enable. mode. 3. Connect a Satellite antenna To the digital receiver, you can connect either a single satellite antenna directly or through converter box several antennas or LNB of multi-feed equipment. You can connect a further Sat-receiver(for example analogue), with the receiver of common antenna equipment that has satellite signals. 4. Loop
2. You can easily put optional value with using NUMERIC buttons(0~9). GB32 Guide of Main Menu column use the symbol rate to input. Then press the EXIT and the RED( )button to exit from input mode. 3. Press the RED( )button for confirmation, and you will successfully exit from input mode. If press the OK button at symbol rate value input mode, the value will be confirmed, and if you moves left or right buttons, you can differ values of To delete a Symbol Rate in the above list, press the 0(Numeri