Terms of Use The HDD size required in your DVR may vary from this calculated test result under some conditions. Total storage capacity may vary depending on complexity of video scenes, DVR specifications and features used on the actual installation sites. Test results and information obtained from these tables are furnished for informational use only. It is user's responsibility to test and allocate appropriate HDD size for his/her DVR systems. 151 Troubleshooting If you have difficulty operatin

7. SET TEMPERATURE: When HDD’s temperature is higher than the temperature set here, all other active settings in HDD TEMP will take effect (BUZZER, ALARM OUTPUT, ALARM DURATION, NETWORK ALARM, SEND EMAIL, STOP RECORD). The default value is 60.C (140.F). 3.11.3 NO HDD In NO HDD, we define: Diagram 3.21 In NO HDD, we define: 1. BUZZER: NO HDD buzzer. ENABLE: To enable a buzzer when no HDD is detected. DISABLE: To disable NO HDD buzzer. 2. ALARM OUTPUT This will transmit a signal to another device.

The second step is to insert the key provided and turn it to the lock position. If this process is ignored the hard disk drive will not be detected. Follow the previous steps for the second hard drive or second empty sleeve. Both hard drives should be set to MASTER. Otherwise, they will not be detected. . Note: A HDD should be installed before EDR1640/1620/920 is booted, or the EDR1640/1620/920 will not detect a HDD until you reboot it with a HDD. Please make sure the green HDD indicator light i

Change these settings as described here and click the Save Settings button to apply your changes or Cancel Changes to cancel your changes. 101 The Applications and Gaming Tab allows you to set up public services on your network, such as web servers, ftp servers, e-mail servers, or other specialized Internet applications. (Specialized Internet applications are any applications that use Internet access to perform functions such as videoconferencing or online gaming. Some Internet applications may

In the Matrix Setting Menu the following fields are defined as follows: .. Call or Matrix Monitor: This field is to set the sequence for the call or matrix monitor output. .. Channel: Represents the channels you want to be displayed in full screen on this output. To change this, simply use the Jog Dial on the DVR. Press the Enter key to make your selection. .. Dwell Time: This field represents the rate at which the cameras will sequence on the call monitor. The dwell time for the auto sequence c

What Type of Network Connection do you have? Everfocus DVR’s can operate using three distinct types of networking connections. 1. Simple One to One Connection: A simple one to one connection is the most simple network connection. Basically it is a connection between a Computer and Another Computer or in this case a DVR using a cross- over cable. (See page on how to install this type of connection) 2. Direct High Speed Modem Connection: A direct high speed modem connection is a network connection

No part of the contents of this manual may be reproduced or transmitted in any form or by any means without written permission of the Everfocus Electronics Corporation. QuickTime is a registered trademark of the Apple Computer, Inc. Windows is a registered trademark of the Microsoft Corporation in the United States and other countries. Linksys is a registered trademark of the Linksys Corporation. D-Link is a registered trademark of the D-Link Corporation. DynDNS is a registered trademark of the

......................................................................................................................................................87 4.11 INFORMATION........................................................................................................... 89 4.11.1 System....................................................................................................................................................89 4.11.2 Log..............................................