Login:

Bernard Q Series

heruntergeladen wurde: 13Dateigröße: 1 mb    Hersteller: Bernard  
Kategorie: Schweißtechnik System

It consists of a 400-amp Q-Gun™with a 15' cable, curvedhandle, standard trigger, rotatable medium 45°neck, Centerfire™0.045" contact tip and a Miller-style direct plug. ChooseYour Time toQ4015AEE8M Amp and Cable Type Q15 150 amp max. wire size: .045" (1.2 mm) Q20 200 amp max. wire size 1/16" (1.6 mm) Q30 300 amp max. wire size: 5/64" (2.0 mm) Q40 400 amp max. wire size: 5/64" (2.0 mm) Q50 500 amp max. wire size: 3/32" (2.4 mm) Q60 600 amp max. wire size: 1/8" (3.2 mm) S30 300 amp Steel "Monocoil

Bernard S300

heruntergeladen wurde: 6Dateigröße: 565 kb    Hersteller: Bernard  
Kategorie: Schweißtechnik System

SPEC DRAFTHD Q™ and S™ Series300,400,500,600AmpMIGGunsAllGunsareNotCreatedEqual. AMIGgunshouldbedurable,easytouseandcustomizedtoyourspecificapplication.OurMIGgunsputyouincontrol:youchoosetheoptionsyouneedandwe'llbuildaguntolast.Weevenshipmostofourgunswithin24hours. CenterfireTMcontacttips,nozzlesanddiffusersareeasy-to-useandhighperforming-theyprovidebetterarcstarts,lessspatterandmoreconsistentwelds-andalsolastuptothreetimeslongerthancompetitivebrands. OnepieceHDstraighthandlewithrubberovermoldis

Bernard Quick Disconnect Feedder End Adapter Kits 4820G - 4995

heruntergeladen wurde: 0Dateigröße: 542 kb    Hersteller: Bernard  
Kategorie: Schweißtechnik System

DFB-ADAPTOR-03.1 1. Quick Disconnect Feeder End may be connected directly to a Bernard adaptor by threading quick disconnect directly into adaptor. Make all necessary power, control, and gas connections. 2. Quick Disconnect Feeder End, PN 4920 is supplied with two long guide tubes (PN 478 and 479) of different I.D.’s which must be cut to the proper length. 3. Select the proper guide tube I.D. from the table below. .023-.052 Electrode Small I.D. .062-1/8 Electrode Large I.D. 4. Install taper end

Bernard SGA-1

heruntergeladen wurde: 3Dateigröße: 416 kb    Hersteller: Bernard  
Kategorie: Schweißtechnik System

Bernard® is the registered trademark of Illinois Tool Works, Inc. Other brands mentioned are for reference only and are the registered trade marks of their respective companies. Illinois Tool Works, Inc. is not affiliated with these other companies.ot affiliated with these other companies. Installation Instructions 1. Remove existing barrel assembly per gun manufacturers directions 2. Install plastic liner from kit into neck/adapter assembly as shown below. 2a. (Optional) Trim plastic liner flus

Bernard SGA-3

heruntergeladen wurde: 0Dateigröße: 416 kb    Hersteller: Bernard  
Kategorie: Schweißtechnik System

4. Install neck/adapter assembly into gun. Secure per gun manufacturers directions. 5. Trim liner beyond neck threads as appropriate for gas diffuser used (3/4" for Centerfire). 6. Attach Bernard Centerfire consumables to neck. See Centerfire spec sheet for available options. When using optional Jump Liner in neck, trim the plastic liner from SGA kit flush withthe front edge of the brass adapter as shown. All SGA KitsSGA-2 Kit OnlyAdjust liner stickout dimension bythreading brass liner lock deep

Bernard SGA-2

heruntergeladen wurde: 3Dateigröße: 416 kb    Hersteller: Bernard  
Kategorie: Schweißtechnik System

SPEC SGA-1.1 The Right Tool For The Job. To improve comfort and minimize downtime, these conversion kits enable the use of long lasting Centerfire Consumables and a wide variety of interchangeable necks for greater flexibility and better weld puddle visibility. CenterfireTM contact tips, nozzles and diffusers are easy-to-use and high performing - they provide better arc starts, less spatter and more consistent welds - and also last up to three times longer than competitive brands. CenterfireTM c

Bernard Q400

heruntergeladen wurde: 3Dateigröße: 372 kb    Hersteller: Bernard  
Kategorie: Schweißtechnik System

Triqqer* Handle Kit, D/S, Lockinq Triqqer* 10 5662 Triqqer, Standard 5662L** Triqqer, Lockinq 2690001 Triqqer, Dual Pull, 3 Wire (With Insulated Terminals) 11 4207 Post Fastener (1 Req'd - Q200 & Q300) (5 Req’d - Q400) 2030004 N/A Post Fastener, Short (4 Rea’d) 12 4209 Handle Screw (5 Rea’d) 13 2660001 Terminal, Quick Disconnect (2 Rea'd) 14 N/A 2520042 Handle Sprinq 15 Replacement Cable With Fittinqs 1060120 1060108 1060114 8' (2.44 m) 1060121 1060109 10601

Bernard Q300

heruntergeladen wurde: 2Dateigröße: 372 kb    Hersteller: Bernard  
Kategorie: Schweißtechnik System

Rotatable necks changeover without tools. Patented Jump Liner allows quick neck change and replacement of only most commonly worn or clogged liner area, which reduces the amount of time a gun is offline and minimizes inventory. Liners coiled in-house with proprietary process that improves wire feed performance and 100 percent tested to ensure smoothest wire feed in the industry. Multiple handle and trigger options to increase operator comfort. Power cable equipped with Stay-Tite™ Technology

Bernard Q200

heruntergeladen wurde: 0Dateigröße: 372 kb    Hersteller: Bernard  
Kategorie: Schweißtechnik System

This technology ensures optimal conductivity to increase weld consistency and lessen heat output while improving product durability. Amperage Ratings — Duty Cycle- Description 100% NEMA 100%CE 60% CE 35%CE Q200 2 en o 2 O O 2 -Ci» O 5 3 CO2 Gas n/a 175 2 O o 2 -Ci» o 80%AR20%C02 Q300 350 0 3 370 470 CO2 Gas n/a 2 -vl O 310 390 80%AR20%C02 Q400 400 350 5 4 0 5 CO2 Gas n/a 285 350 440 80%AR20%C02 All Guns are Not Created Equal. A MIG gun should be durable, easy to use and customize

Bernard MIG Gun Configurator

heruntergeladen wurde: 6Dateigröße: 334 kb    Hersteller: Bernard  
Kategorie: Schweißtechnik System

SPEC ACA-1.1 All Guns are Not Created Equal. A MIG gun should be durable, easy to use and customized to your specific application. Our MIG guns put you in control: you choose the options you need and we'll build a gun to last. Air-Cooled Automatic MIG gun without cable shown with Centerfire™ consumables MIG gun configurator allows easy, precise customization of just the right A/C Automatic MIG gun for your welding job. Amperage ratings at 100% duty cycle with CO2 gas: 300 and 500 amps. Power cab





Kategorien