This product Is not designed for built-in Installation; do not place the product In an enclosed place such as a bookcase or rack, unless proper ventilation Is provided or the manufacturer’s Instructions are followed. 8.Heat sources—Do not Install near any heat sources such as radiators, heat registers, stoves, or other apparatus (Including amplifiers) that produce heat. 9.Grounding or Polarization—Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has tw

If you have a cable run of more than 100 feet or need to run through diplexers and/or splitters use a signal preamplifier that is installed as close to the antenna as possible. 6. To avoid signal loss, do not attach the coaxial cable to the mast, use standoffs (fig. 7) (sold separately). Analog TV Pointing Method This method uses a conventional analog TV to chose the best spot for a DTV antenna. 1. Place antenna in as high location with as few obstructions in front of behind or to the sides of t

6. Connect 2 mast sections as shown in figure 6 (included in SDV9201K only) ENAiming the Antenna 7. Connect a good quality RG-6 coaxial cable to the transformer. Slide the weatherproof boot over the connection firmly until it seals (fig.7) (Cable sold separately) fig. 7 fig. 8 8. Attach cable standoff to mast as shown in figure 8 (included in SDV9201K only) Aiming the Antenna Before permanently mounting the antenna for digital television (DTV) reception it is a good idea to perform a quick sight

Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 7. Power-Cord Protection Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, playing particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. 8. Lightning For added protection of this product during storms, or when it is left unattended and unused for long periods of time, unplug it from

Never spill liquid of any kind on the product. 10. Attachments. Do not use attachments not recommended by the product manufacturer as they may cause hazards. Important Safety Instructions PLEASE READ AND OBSERVE ALL WARNINGS AND INTRUCTIONS IN THIS OWNER'S MANUAL AND THOSE MARKED ON THE UNIT, RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this

If shipment of the product is required, it should be packed properly. The original dated bill of sale must always be included with the product as proof of warranty coverage. What We Will Pay For. We will pay for all labor and material expenses required to repair the product, but you must pay any labor costs for the removal and/or installation of the product. If the product is shipped for warranty service, you must prepay the initial shipping charges, but Audiovox Corporation will pay the return

It is recommended to use spot lighting directed down from the ceiling or to cover the windows that face the screen with opaque drapery. It is desirable to install the TV in a room where the floor and walls are not of a reflective material. Cautions: • Do not install the TV in protruding locations. • Do not install this unit in restaurants where oily vapors occur. Dust absorbing oil may enter into the unit and damage the unit. • Do not install this unit outdoors. If the unit is exposed to rai

Press this key once more, the tape will advance at a high speed. Ul 0 • Press the REW key once in the playback mode. And then the tape is rewound rapidly with the pictures. Press this key once more the tape will rewind at a high speed. ► PUT 6 • Press the PLAY key during playback and then the VCP enters the ReAuto Tracking mode. 12 IDENTIFICATION FRONT PANEL When power is supplied to the set, the power indicator The Power ON and Power OFF mode will be toggled by When the POWER is switched

Always point the Remote Control directly at the FP1510 sensor. ■ IR sensor CAUTION !! Avoid damaging the Remote Control by : # Applying excessive pressure when pressing buttons 9 Exposing to extreme Low or High temperatures # Exposing to excessive Moisture # Mishandling to Dropping 11 Assembly and Connection Assembly of the TFT-LCD 1.3.Speaker 2.Monitor and 4.Stand DISPLAY BRACKET MOUNTING WALL MOUNTING NOTE : When mounting to wall please secure to wall stud. Power Cable Power Tra

25070PD2580090 IMPORTANT SAFETY INFORMATION - PLEASE READ FIRST 1. Read these instructions. 2. Keep these instructions. 3. Head all warnings. 4. Follow all instructions. 5. Clean only with a damp cloth. 6. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions. 7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 8. Do not defeat the safety purpose of the p