Die Sicherheitshinweise der mitgelieferten Produktdokumentation sind zu beachten. This declaration certifies the compliance with the indicated directives but implies no warranty of properties. The safety instructions of the accompanying product documentation shall be observed. Cette declaration certifie la conformite avec les directives indiquees mais n'implique aucune garantie des proprietes. Les instructions de securite de la documentation accompagnant le produit doivent etre suivies. ISO 9001

September 2002 entspricht und von der benannten Stelle Nr. 0735 (BSH) typengeprüft wurde. Darüber hinaus ist die Konformität gemäß Commission Regulation (EC) No. 415/2007 zum „Standard Schiffsverfolgung und Aufspürung in der Binnenschifffahrt, Edition 1.01 vom 10.10.2007“ sowie zum „Test Standard for Inland AIS Edition 1.0“ vom 31. May 2007 gewährleistet. This declaration of conformity certifies that the specified equipment is in compliance with EC Council Directive 96/98/EC of 20 December 1996

ACR shall not be made liable for any specific, indirect, incidental or consequential damages as a result of its use. ACR components may only be used in safety of life devices or systems, with the express written approval of ACR, as the failure of such components could cause the failure of the ACR device or system. If these fail, it is reasonable to assume that the safety of the user or other persons may be endangered. Copying of this document, and giving it to others and the use or communication

Ausnahme: Einige Werte wie z.B. die Drehrate konnen errechnet werden. Wurde ein Wert zur Berechnung eines anderen herangezogen so wird das im Menu „Analyze Sensor Configuration. neben der Angabe des Sensors durch die Meldung „Calc. angezeigt. Berechnung der Drehrate(ROT) aus dem heading Die Drehrichtung links/rechts = -/+ wird aus dem heading Wert berechnet wenn keine TIROT Satze verfugbar sind. Nur Sender mit der Kennung „TI. sind gultige Drehratengeber. ROT > +10°/min . Output +720°/min ROT <

0735 Bernhard-Nocht-Str. 78, 20359 Hamburg, Germany Inland AIS Type Approval Certificate No: R - 4 - 203 Issued by: Fachstelle der WSV für Verkehrstechniken _Weinbergstraße 11-13, 56070 Koblenz, Germany_ Spezifizierte Standards: Specified Standard(s) I Standard(s) Spécifié(s) IMO MSC.74(69) Annex 3 ITU-R M.1371-3 (Class A) IALA Technical Clarifications of Rec. ITU-R M.1371-1 (Ed. 1.3) ITU-R M.825-3 ITU-R M1084-3 IEC 61993-2 (2001) IEC 61162-1 (2000), -2 (1998) IEC 60945 (1996) IEC 6110

du document 2009-05 Hersteller: Manufacturer I Fabricant ACR Electronics Inc., 5757 Ravenswood Road, Fort Lauderdale, Florida, 33312 USA Anschrift EU-Vertretung: Address EU-Representative I Adresse du Représentant pour l'UE ACR Electronics Europe GmbH Handelskai 388 I Top 632 A-1020 Vienna, Austria Ort, Datum: Vienna, 2009-07-22 place, date I Lieu,Date Unterschrift: Signature I Signature Andreas Lesch Managing Director Diese Erklärung bescheinigt die Übereinstimmung mit den genannten Rich

3.6 Graphical User Interface (GUI) The advanced version of the NAUTICAST is fitted with the new Graphical User Interface. The intention of this interface is to enable the operator to visualize any AIS traffic, which is traveling around the own position. Fast and direct access to AIS data is supported by display of a list containing vessel information, which can be reached directly from the Navigation Screen and viewed in two views (radar and fairway orientations). The NAUTICAST display is limite

Enter RefPtExt (location of the external GPS antenna) in the same way. Ship length and beam have to be entered in dm. Conversion 1m is 10dm. NOTE: The field ATIS Code will be shown as Call Sign in “High Seas” - Mode. The field Length(ship) and Beam(Ship) are only the values of the ship and calculated in dm (1m / 10). For stand alone ship enter same dimensions, Length(ship) and Beam(Ship) again. Save the new settings by pressing [Save]. Press [Back] return to the Main Menu Screen without saving a

Use the antennas supplied with this kit. The VHF antenna supplied for use with the Nauticast™-B is omni-directional, vertically polarized with unity gain (0 dB) and a band width sufficient to maintain VSWR <1.5 over the frequency range 156–163 MHz. As a minimum the 3dB bandwidth will cover the two AIS channels and the DCS channel. The antenna is also suitable for marine shipboard applications (index of protection, ruggedness, means of mounting, etc.). If you elect to not use the antenna supplied

C Manual Footer In the United States WARNING: It is a violation of the rules of the Federal Communications Commission to input an MMSI that has not been properly assigned to the end user, or to otherwise input any inaccurate data in this device. WARNING: This product is a supplemental navigation tool only! The user assumes all responsibility associated with the use of this device and safe navigation. It is important to understand that all vessels may not be equipped with AIS transponders and the