® 2 Charge the remote The next step is to install the Xsight™ Touch’s rechargeable battery, plug in its cradle, and let it charge for 3 to 4 hours. ® Remove the battery door from the Install the rechargeable battery Assemble the charging cradle by back of the Xsight™ Touch. Press up in the Xsight™ Touch’s battery sliding the cradle rest into the cradle on the latch to release the door. compartment and replace the battery base as shown here. door. Plug the AC adapter into the cradle as shown. Plu
Press and hold thebutton for 5 seconds to put the Mini-Bridge into pairing mode. 2. Make the connection from the Bluetooth device. IMPORTANT CONNECTION INFORMATION If you turn the Mini-Bridge off or leave its range of operation with your Bluetooth device, you will have to re-establish the connection before using the Mini-Bridge again. 7 Using Your Mini-Bridge Making Phdne Calls TD MAKE A call: 1. Enter the phone number on your phone. 2. Press the button on the Mini-Bridge twice to place
What appears on the window varies depending on the function you are using. To display the Source menu: • Press to display the Source menu for selection of an audio source. • Now Playing – appears at the top of the Source menu when a station is playing. Select this option to return to the play screen. To navigate in the menus: • Use the navigation controls to make choices and input information. Moves highlight up Moves highlight down Moves selection/navigates left Moves selection/navigates right
. . . . . . . . : Monday, May 12, 2008 7:05:37 PM Lease Expires . . . . . . . . . . . : Thursday, May 15, 2008 7:05:37 PM C:\Documents and Settings\Administrator> 4. Launch your Web browser and enter the Router’s Default Gateway address, (in the EN above example: 192.168.36.1 or 192.168.0.1) in the Address field that was found above and then press Enter. The address depends on whether the Enabler is configured as a Router or as an Access Point (AP) on your system. 5. When the below screen appear
Polarity is indicated by a color stripe on the insulation, by ridges molded into the insulation, or by the colors of the wire - one copper and one silver. Strip the insulation from the speaker wire ends to reveal the bare conductors before connecting to a speaker, subwoofer or receiver. Always connect the red (+) terminal on the receiver to the red (+) terminal on the Subwoofer, and connect the black (-) terminal on the receiver to the black (-) terminal on the Sub- woofer. The same is true for
Contents Safety information FCC information ..........................................................................3 Technical specification ............................................................. 4 Electrical power source............................................................4 Product registration .................................................................. 4 For your records ......................................................................... 4 Important battery precau
SOUND Button (On Remote Control Only) This button allows you to switch on/off 3D surround effect. / (Play/Pause) (On Remote Control Only) – Press this button on the remote control to begin playback on your iPad/iPhone/iPod. Press again to Pause playback. / Skip Forward/Back buttons (On Remote Control Only) - During playback press to skip forward or backward to the next or previous track. MENU button (On Remote Control Only)- If an iPod is docked and the Acoustic Research Dock Plus App is not run
AP097 6 ft. (1.8 m) AP098 12 ft. (3.6 m) A/V RECEIVER • HDTV HDTV TUNER • HD DVD PLAYER HDTV CABLE BOX SATELLITE RECEIVER COMPONENT VIDEO Carries video signal over three individual paths for best picture quality. AP090 3 ft. (0.9 m) AP091 6 ft. (1.8 m) AP092 12 ft. (3.6 m) A/V RECEIVER • HDTV • DVD HDTV CABLE BOX SATELLITE RECEIVER BETTER VIDEO RIGHT LEFT VIDEO INPUT TV INPUT S-VIDEO AUDIO VIDEO CAMCORDER SPECIALTY COMPOSITE VIDEO CAMCORDER CABLE MINI A/V PLUG TO RCA AUDIO AND VIDEO For hooking
It’s really about what kind of cable matches your component and hook-up scenario. The Best options provide both a digital video and digital audio signal through a single cable. Better connection options require independent cables to provide a digital video signal or an audio signal. And good connection options offer you the best of an analog signal delivery. You’ve invested wisely in today’s digital high definition video components and multichannel digital audio components. Get the most out of y
Remove the battery door from the back of the Xsight™ Color. Press up on the latch to release the door. Insert the batteries (provided in this package), matching them to the (+) and (-) marks inside the battery case. Replace the battery door. Need help setting up this remote? Please call our help line toll-free at 1-800-276-0509. The interactive LCD screen The top of the Xsight™ Color features a customizable LCD screen that can be set up using keys on the remote or by connecting the remote to you