Save these instructions. See page 3 for model information, including maximum working pressure. TI8900a TI8885a II 2 G Contents Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Dura-Flo Pumps with NXT™ Air Motors . . . . . . . 3 Dura-Flo Pumps with Viscount® Hydraulic Motors 5 Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Grounding . . . . . . . . . . . . . . .

INSTRUCTIONS Displacement Pump 1000 psi (70 bar, 7 MPa) Maximum Working Pressure Model 210–208, Series F 308–043 Rev. F Supersedes Rev. C and PCN D GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441 COPYRIGHT 1990, GRACO INC. Graco Inc. is registered to I.S. EN ISO 9001 Table of Contents Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Setup/Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 . .......................................

1 Y W 06431 . . Installation Mount the pump to suit the type of installation planned. Pump dimensions and mounting hole layout are shown on page 14. CAUTION The hydraulic supply system must be kept clean at all times to avoid damage to the motor and hydraulic power supply. Blow out all hydraulic lines with air and flush thoroughly with compatible solvent before connecting the lines to the motor. Always plug the hydraulic inlets, outlets, and lines when disconnecting them for any reason, to avoid

180 psi (1.2 MPa, 12.4 bar) Maximum Air and Fluid Working Pressure Oil Pumps Model No. 222051, Series E Universal Pump Model No. 222103, Series E 55-Gallon Drum, Bung-Mount Pump Model No. 222104, Series E 275-Gallon Tank, Bung-Mount Pump 307906V CAUTION These pumps are designed to pump lubricating fluids only. Models 222103 222104 Model 222051 05939B 05940B Important Safety instructions Read all warnings and instructions in this manual. Save these instructions. See page 2 for Table of Contents.

(10 mm) OD 114478 114478 1 TUBE, flare; sst; 9/16–18 unf–2a x 3/8 in. (10 mm) OD 114477 114477 1 8 FITTING, bulkhead 192889 192889 192889 192889 1 9 WASHER, flat; 9/16 in. 114830 114830 114830 114830 1 10 NUT, hex; 9/16–18 102300 102300 102300 102300 1 11 NIPPLE; cst; 3/8 npt 156849 156849 1 NIPPLE; sst; 3/8 npt 166469 166469 1 12 UNION, swivel, straight; cst; 3/8 npt(m) x 3/8 npsm(f) 155665 155665 1 UNION, swivel, straight; sst; 3/8 npt(m) x 3/8 npsm(f) 235208 235208 1 13 FLUID FILTER; cst; see

*3 *4 0805 0806 LUBRICATE PACKINGS 0805 *19 *4 18* 18* *3 (Rectangle comment Karen Scherer 26.05.2004 23:58:46 blank) (Rectangle comment Karen Scherer 26.05.2004 23:59:16 blank) . . Technical Data WARNING Be sure that all fluids and solvents used are chemically compatible with the Wetted Parts listed below. Always read the manufacturer’s literature before using fluid or solvent in this pump. Category Data Maximum fluid working pressure 28.3 MPa, 283 bar (4100 psi) Maximum air input pressure 0.7

C First choice when quality counts. This gun and hose for Delta Spray Air Spray package or Delta Spray HVLP package This gun and hose for PRO 3500sc Electrostatic package INSTRUCTIONS–PARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. ACETAL HUSKY 307, WALL-MOUNT PUMP, DRUM SUCTION PRO/ Delta Spray Packages Metal fluid fittings and hose couplings are stainless steel. 100 psi (0.7 MPa, 7 bar) Maximum Fluid Working Pressure 100 psi (0.7 M

241594 Pump, Series B, 10:1 Ratio, with Falcon Air Motor 1500 psi (10.3 MPa, 103.5 bar) Maximum Fluid Working Pressure 150 psi (1.0 MPa, 10.4 bar) Maximum Air Input Pressure Part No. 241595 Pump, Series B, 20:1 Ratio, with Falcon II Air Motor 2200 psi (15 MPa, 152 bar) Maximum Fluid Working Pressure 100 psi (0.7 MPa, 7 bar) Maximum Air Input Pressure Chinese Patent No. ZL00808468.8 Taiwan Patent R.O.C. New Invention Patent No. 163401 U.S. Patent No. 7,168,856 France Brevet No. 1192362 Germany DB

See Technical Data, page 20. Flush until clean solvent comes out of hose. 312350E Operation Starting Pump 1. Turn on hydraulic power supply. 2. Open return line shut-off valve (H) first, then slowly open the hydraulic supply shut-off valve (L). 3. Adjust flow control valve (Q) to limit the hydraulic flow to no more than 3 gpm (11 lpm), which is approximately 60 cycles per minute. 4. Adjust pressure reducing valve (N) to increase hydraulic inlet pressure from 50 to 600 psi (0.34 to 4.1 MPa, 3.4 t