Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
*3 *4 0805 0806 LUBRICATE PACKINGS 0805 *19 *4 18* 18* *3 (Rectangle comment Karen Scherer 26.05.2004 23:58:46 blank) (Rectangle comment Karen Scherer 26.05.2004 23:59:16 blank) . . Technical Data WARNING Be sure that all fluids and solvents used are chemically compatible with the Wetted Parts listed below. Always read the manufacturer’s literature before using fluid or solvent in this pump. Category Data Maximum fluid working pressure 28.3 MPa, 283 bar (4100 psi) Maximum air input pressure 0.7 MPa, 7 bar (100 psi) Ratio 41:1 Pump cycles per 3.8 liters (1 gallon) 26 Fluid flow at 60 cycles per minute 8.7 liters/min (2.3 gpm) Air motor piston effective area 248 cm (38 in.) Stroke length 120 mm (4.75 in.) Displacement pump effective area 6 cm (0.93 in.) Maximum operating temperature 82C (180F) Air inlet size 3/4 npsm(f) Fluid inlet size 1–1/2” npt(f) Fluid outlet size 3/4 npt(f) Pump weight approx. 39 kg (86 lb) Displacement pump weight approx. 13 kg (29 lb) Wetted parts 304, 440 and 17–4 PH Grades of Stainless Steel; Tungsten Carbide; PTFE; . Leather (Rectangle comment Karen Scherer 27.05.2004 0:00:00 blank) Teflon is a registered trademark of the DuPont Co. Sound Pressure Levels (dBa) (measured at 1 meter from unit) Air Motor Input Air Pressures at 15 cycles per minute 0.28 MPa, 2.8 bar (40 psi) 0.48 MPa, 4.8 bar (70 psi) 0.63 MPa, 6.3 bar (90 psi) (Rectangle comment Karen Scherer 26.05.2004 23:59:57 blank) 0.7 MPa, 7 bar (100 psi) Bulldog 82.4 dB(A) 87.3 dB(A) 88.5 dB(A) 90.0 dB(A) Reduced Icing Quiet Bulldog 81.5 dB(A) 83.6 dB(A) 85.6 dB(A) 85.8 dB(A) Sound Power Levels (dBa) (tested in accordance with ISO 9614–2) Air Motor Input Air Pressures at 15 cycles per minute 0.28 MPa, 2.8 bar (40 psi) 0.48 MPa, 4.8 bar (70 psi) 0.63 MPa, 6.3 bar (90 psi) 0.7 MPa, 7 bar (100 psi) Bulldog 91.6 dB(A) 95.9 dB(A) 97.4 dB(A) 98.1 dB(A) Reduced Icing Quiet Bulldog 90.2 dB(A) 93.5 dB(A) 94.9 dB(A) 93.3 dB(A) . . Technical Data KEY: Fluid Outlet Pressure – Black Curves A 0.7 MPa, 7 bar (100 psi) Air Pressure Air Consumption – Gray Curves B 0.49 MPa, 4.9 bar (70 psi) Air Pressure C 0.28 MPa, 2.8 bar (40 psi) Air Pressure cycles/min psi MPa, bar 13 26 39 52 65 78scfm 60 m/min 250 35.0, 350 7.00 200 5.60 28.0, 280 A B A C B C 150 4.20 21.0, 210 100 2.80 14.0, 140 50 1.40 7.0, 70 . . . . . . gpm liters/min 1.9 3.8 5.7 7.6 9.5 11.4 FLUID FLOW (NO. 10 WEIGHT OIL) To find Fluid Outlet Pressure (MPa/bar/psi) at a specific fluid flow To find Pump Air Consumption (m/min or scfm) at a specific fluid (lpm/gpm) and operating air pressure (MPa/bar/psi): flow (lpm/gpm) and air pressure (MPa/bar/psi): 1. Locate desired flow along bottom of chart. 1. Locate desired flow along bottom of chart. 2. Follow vertical line up to intersection with selected fluid outlet pressure curve (black). Follow left to scale to read fluid outlet 2. Read vertical line up to intersection with selected air consumption pressure. curve (gray). Follow right to scale to read air consumption. . . Dimensions Mounting Hole 04373 Model 237634 Shown A B C D E F G H Layout 101.6 mm (4.0”) 50.8 mm (2.0”) 88 mm (3.464”) 94.28 mm (3.712”) 11.1 mm (0.437”) DIA (4) 94.28 mm (3.712”) 0653 Three M16 x 2.0 Holes Pump Model A B C D E F G H 237634 1105 mm 561 mm 544 mm 257 mm 1–1/2 in. 3/4 npt(f) 3/4 npsm(f) 1–1/2 in. (43.50 in.) (22.09 in.) (21.42 in.) (10.12 in.) npt(f) npt(f) 236464 1155 mm 561 mm 594 mm 257 mm 1–1/2 in. 3/4 npt(f) 3/4 npsm(f) 1–1/2 in. (45.47 in.) (22.09 in.) (23.38 in.) (10.12 in.) npt(f) npt(f) 686615 . . Graco Standard Warranty Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written recommendations. This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non–Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Graco. This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free...