426 Hemi) and 1969-1985 318-360 Chrysler V8’s Part #8814,8824, 8877 & 8887 INSTALLATION INSTRUCTIONS PLEASE study these instructions carefully before beginning this installation. Most installations can be accomplished with common tools and procedures. However, you should be familiar with and comfortable working on your vehicle. If you do not feel comfortable performing this installation, it is recommended to have the installation completed by a qualified mechanic. If you have any questions, pl

Therefore, please consult your service manual for specific procedures. CAUTION: Be sure that the fan bolts don’t protrude through the hub so far that they hit the water pump housing. Check closely for any interference with drive belts; some filing for clearance may be necessary with some applications. Verify that the radiator fan is properly balanced. Imbalanced fans can cause severe damage and/or injury and will void your warranty. WARNING Incorrect alignment or an unbalanced condition puts

If you have any questions or problems, do not hesitate to contact our Technical Hotline at: (800) 416-8628. • DESCRIPTION : The Edelbrock aluminum water pump is a heavy duty water pump for both street and racing applications. The pump is externally the same as the original equipment service pump (Ford #D4TZ-8501-H) to provide compatibility with all accessories and pulleys. It offers weight savings along with increased cooling potential. As with all Ford FE engines the water pump is designed to

Consult your service manual for any other specific procedures. Caution: Be sure that the fan bolts don't protrude through the hub so far they hit the water pump housing. • SPECIAL NOTES : — Check closely for any interference with drive belts or pulleys. — If the engine is not using a water thermostat, a water flow restrictor plate should be used in place of the thermostat. The hole size needed in the restrictor plate may vary in size from 11/16" to 1" diameter depending on your water system.

Failure to follow instruction will void warranty and may cause damage to parts and/or personal injury. If you have any questions or problems, please call our Technical Hotline at: 1-800-4168628, 7:00 am - 5:00 pm, Pacific Standard Time, Monday through Friday or e-mail us at Edelbrock@Edelbrock.com. PLEASE complete and mail your warranty card. Be sure to write the model number of this product in the “Part #_” space. • DESCRIPTION: The Edelbrock aluminum water pump is a heavy-duty water pump for

If you do not feel comfortable performing this installation, it is recommended to have the installation completed by a qualified mechanic. If you have any questions, please call our Technical Hotline at: 1-800-416-8628, 7:00 am - 5:00 pm, Pacific Standard Time, Monday through Friday or e-mail us at edelbrock@edelbrock.com. IMPORTANT NOTE: Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehi

La mayoria pueden ser llevadas acabo con herramientas y procedimientos comunes. De cualquier manera, debe de estar familiarizado y sentirse agusto de trabajar en su vehiculo. Si no se siente agusto llevando acabo esta instalacion, es recommendable que la instalacion sea hecha por un mecanico calificado. Si tiene alguna pregunta, por favor llame a nuestra linea de ayuda tecnica al: 1-800-416-8628, 7:00 am - 5:00 pm, Horario Estandard del Pacifico, Lunes a Viernes o por correo electronico a edelbr

NOTA IMPORTANTE: La instalacion apropiada es responsabilidad del instalador. La instalacion inapropiada anulara su garantia y puede resultar en un desempeno pobre y danos al motor o vehiculo. • DESCRIPCION: La bomba de agua de aluminio Edelbrock® es una bomba de agua para trabajos pesados para aplicaciones de calle y carreras. La bomba externamente es similar a la bomba del equipo original, por lo tanto provee compatibilidad con cualquier accesorio y poleas. Ofrece a la larga un enorme ahorro co

Ofrece a la larga un enorme ahorro con mayor durabilidad y potencial de enfriamiento. • La parte #8850/#88502/#8860 es una bomba de base corta para autos de pasajeros 1965-68, camionetas de trabajo ligero 1967-72 y Corvettes 1969-70. • La parte #8851/#88512/#8861 es un diseno de base larga para autos de pasajeros 1969 y camionetas de trabajos ligeros Chevrolet 1973-86 con monobloque grande V8s (no queda en Corvettes o camionetas de trabajo pesado de mas de 1 tonelada) • La parte #8852/#8862 es u

Consult service manual for specific procedures, if necessary. CAUTION: Be sure that fan bolts don't protrude through the hub so far that they hit the water pump housing. NOTE: Removal of backing plate is not recommended,as there are no user serviceable parts in the water pump.If backing plate is removed,use no sealer on the O-ring during re-installation,and use conventional gasket sealer (not RTV silicone) on gasketed models. • SPECIFICATIONS Dimension from block surface to hub: #8850, #88502 &