Air Compressor Pump: Pump compresses air into tank. Check Valve: When unit is operating, Check Valve is open, allowing air to enter tank.At “cut-out” pressure, Check Valve closes, preventing air from flowing back into pump.Valve is not serviceable by user. Data Tag: (not shown) The data tag contains serial number, model number, and revision number information. Drain Valve: Valve is located near bottom of air tank and is used to drain condensation. Overload Protector: If motor overheats, overload

CAUTION, when not used with the safety alert symbol ( ), indicates a situation that could result in equipment damage. Follow safety messages to avoid or reduce the risk of injury or death. Hazard Symbols and Meanings Fire Auto-start Explosion Compressed Air InhalationHot Surface Electrical Shock Flying Objects Air Injection 2 SAFETY RULES WARNING WARNING Failure to read and follow instructions in manual can result in death, bodily injury and / or property damage. • Before using this product, rea

Also Recommended for Use: • Safety glasses (ANSI Z87.1 approved safety glasses with side shields) • Air hose - 25 ft (7.5M), 3/8 inch diameter • Quick connector fitting - Use type I/M quick connect fittings that attach to 1/4 inch NPT thread • Hearing protection (ANSI S3.19-1974) in noisy environments • Respirator (NIOSH-approved) in dusty environments Verify Engine and Pump Oil Levels CAUTION! Any attempt to start the compressor before it has been properly serviced with the recommended oil may

203719A Revision - (01/21/08) EXPLODED VIEW Copyright © 2008 Briggs & Stratton Power Products Group, LLC. All rights reserved. No part of this material may be reproduced or transmitted in any form by any means without the express written permission of Briggs & Stratton Power Products Group, LLC. 2 BRIGGSandSTRATTON.COM PARTS LIST Item Part # Description Item Part # Description 1 200673GS TUBE, Infeed 24 200689GS KIT, Valve Plate 2 200674GS VALVE, Relief 25 * SCREW, Taptite M5 x 20 3 1999

203721A Revision - (01/21/2008) EXPLODED VIEW 4 Copyright © 2008 Briggs & Stratton Power Products Group, LLC. All rights reserved. No part of this material may be reproduced or transmitted in any form by any means without the express written permission of Briggs & Stratton Power Products Group, LLC. 2 BRIGGSandSTRATTON.COM PARTS LIST Item Part # Description 1 199175GS DECAL, Hot Surface 2 * SCREW, M8 x 45 3 200699GS CONVEYOR, Air 4 * PPHMS, 5 x 12 5 201389GS PLATE, Filter 6 200697GS

Check oil level frequently at higher temperatures. Synthetic 5W-30 .20 to 120F(.30 to 40C) provides the best protection at all temperatures as well as improved starting with less oil consumption. 5W-30 40F and below (5C and below) is recommended for winter use, and works best in cold conditions. Oil Capacity The engine holds approximately 5/8 qt. (20 oz; 0.6 liter). Adding Oil • Check oil level before starting the engine. • Keep oil level at FULL. • Check level daily, or after every eight (8) ho

THOMAS, ONTARIO, CANADA Printed in U.S.A. ©Copyright by the Gorman-Rupp Company IK WARNING! | The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. TABLE OF CONTENTS INTRODUCTION..................................................................................................PAGE I - 1 SAFETY - SECTION A........................................................................................PAGE A

If overheating occurs, stop the pump and allow it to cool before servicing it. Refill the pump casing with cool liquid. A WARNING! I Do not remove plates, covers, gauges, pipe plugs, or fittings from an overheated pump. Vapor pressure within the pump can cause parts being disengaged to be ejected with great force. Allow the pump to cool before servicing. Strainer Check If a suction strainer has been shipped with the pump or installed by the user, check the strainer regularly, and clean it a

TABLE OF CONTENTS Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 Engine Information . . . . . . . . . . . . . . . . . . . . . . . . 6 Oil. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Fuel and Starting Information . . . . . . . . . . . . . . . 8 Starting and Stopping . . . . . . . . . . . . . . . . . . . 9-10 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . 11-13 Adjustments . . . . . . . . . . . . . . . . . . . . . . .

This warranty gives you specific legal rights and you may also have other rights which vary from state to state.” Briggs & Stratton Corporation F. P. Stratton, Jr. Chairman and Chief Executive Officer WARRANTY PERIOD ENGINES WITHIN U.S.A. AND CANADA OUTSIDE U.S.A. AND CANADA CONSUMER USE* COMMERCIAL USE* CONSUMER USE* COMMERCIAL USE* All Vanguard. engines. 2 year – engine . All Diamond Plus., Industrial Plus., I/C. engines and sleeve bore Intek series. 2 year 1 year 2 year . 1 year Quantum. and