|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Contents
Remove the Fans and Fan Cage ................................................................. 25
Remove Processor Tray .............................................................................. 27
Remove I/O Tray ......................................................................................... 28
Remove Midplane Board and Center Support .............................................. 30
Apply Gaskets to Chassis ............................................................................ 33
4 Preparing to Assemble the LXr 8500 ........................................................ 35
Prepare the LXr 8500 Processor Tray.......................................................... 35
Prepare the LXr 8500 Memory Board(s)................................................... 39
5 Assembling the LXr 8500 .......................................................................... 41
Install the Midplane Board and Center Support ............................................ 42
Install the I/O Baseboard and Tray............................................................... 47
Check I/O Configuration Switches................................................................ 49
Install I/O Riser Board and Remote Control Card ......................................... 51
Install the Processor Tray ............................................................................ 53
Install the Memory Board ............................................................................. 54
Install the Fan Cage and Fans ..................................................................... 56
Apply Labels, Gaskets and Install Power Supplies ....................................... 58
6 Preliminary Hardware Verification ............................................................ 63
Hardware Checklist ..................................................................................... 63
Power On the NetServer.............................................................................. 64
Common Installation Problems .................................................................... 65
The NetServer Will Not Power On............................................................ 65
The NetServer Power is On, but There is No Display on the Monitor........ 66
The NetServer Power is On, but System Information Does Not Match
Hardware................................................................................................. 66
Start the HP NetServer Navigator CD-ROM ................................................. 67
Update the BIOS and Firmware, If Necessary .......................................... 67
7 Finishing the Assembly............................................................................. 69
Add Remaining Processors.......................................................................... 69
Determine the Slot Position of Each Accessory Board.................................. 70
Install Accessory Boards in the I/O Baseboard............................................. 71
Install the Top Cover, Bezel, and Cables ..................................................... 75
8 Reinstalling Your NOS............................................................................... 77
Run the Setup Utility.................................................................................... 77
Run the HP DiagTools Utility........................................................................ 78
Create HP DiagTools Diskettes ............................................................... 78
iv
...Dieses Handbuch ist für folgende Modelle:
PC Desktops - HP NetServer LC 2000 (828.73 kb)
PC Desktops - HP NetServer LC 2000r (828.73 kb)
PC Desktops - HP NetServer LC II (828.73 kb)
PC Desktops - HP NetServer LC Plus (828.73 kb)