Stimmen - 5, Durchschnittliche Bewertung: 4 ( )

Hersteller: Hitachi Dateigröße: 2.33 mb Dateiname: Unterrichtssprache:

You can use , , , or to move the Red and Blue crosshairs. Press VIDEO to switch between Red and Blue. Press AUDIO for the Advanced Convergence screen, and see Advanced Convergence, page 45, for instructions. Figure 1. Setup menu, (Convergence selected) Figure 2. Reset Factory Defaults menu Red Press ADJUST to converge the lines. Press VIDEO to switch from Red to Blue. Press MENU to go back. Press CANCEL to delete changes. Press AUDIO for Advanced Convergence. 44 Figure 2. Convergence screen Setup Menu: Advanced Convergence, Transport Menu,and LanguagePress INFO for helpPress INFO for help Figure 1. Advanced Convergence menu There are more than 64 line intersections but the flashing bracket only stops at the 64 adjustment positions. IMPORTANT Figure 2. Setup menu (Transport menu selected) Figure 3. Transport menu Advanced Convergence Menu (Figure 1) After adjusting the Red Convergence and Blue Convergence, you can fine-tune your TV by adjusting the Red and Blue convergence at 64 individual points. 1. Move the flashing bracket to a position needing adjustment by pressing , , , or . 2. Press ENTer to select the position (flashing will stop). 3. Move the Red or Blue line by pressing , , or . 4. Press VIDEO to switch between the Red and Blue lines. A position is properly converged when all three lines combine to appear white. 5. Press ENTer to deselect the position (flashing will resume), and move the brackets to the next position needing adjustment. 6. When completed, press MENU or HOME to save your changes, and exit the Advanced Convergence screen. 7. Press INFO to display detailed instructions on using the Advanced Convergence. Then press INFO or MENU to return to the Advanced Convergence menu. Language Menu (Figure 2) Display the on-screen menus in either English or Spanish (Espanol). The first time your TV was powered on, you were requested to select an on- screen menu language. When the radio button setting is changed, the screen language changes automatically. Transport Menu (Figures 2 and 3) The Transport Menu is used by NetCommand™ to control VCRs, DVDs, IEEE 1394 AV Disc, digital VCRs, and similar devices. This menu can be turned off if you would rather not have it displayed. The transport buttons on the remote control will continue to operate these devices. See the NetCommand™ Guide for further details. 45 Antenna Menu: Antenna, Memorize Channels, Channel, Memory and Name Antenna Menu (Figure 1) Select Ant-A, Ant-B, or Ant-DTV for use with the rest of the option on the Antenna Menu. You can memorize channels, add or delete channels, and add channels to an SQV (Super Quick View™) list. For Ant-A and Ant-B, you can name channels. Memorize (Figure 1) For ANT-A or ANT-B Select either Air (when used with an indoor/outdoor antenna) or Cable (when used with direct cable) then press ENTer to start the automatic channel memorization process. For ANT-DTV Select Air when used with an indoor/outdoor antenna. Select Cable when used with Direct cable. There are three types of Cable systems: Standard, IRC and HRC. To memorize Standard or IRC, select Cable; to memorize HRC, select Cable (HRC). Check with your Cable company to determine which type of Cable system they use. If your cable company cannot help you, select Cable. To stop the automatic channel memorization process, press CANCEL. Channels memorized before you pressed CANCEL are retained in memory. After memorizing channels, the channels in the memory can be accessed in ascending or descending order or by pressing the CH or buttons. Channel (Figure 1) Select the channel you want to add or delete from memory, name, or add to an SQV (SuperQuickView™) list. Use ADJUST or to select the channel for editing or use the CH or buttons for only those channels already in memory. Figure 1. Antenna menu On Ant-DTV, when the broadcaster has sent a virtual channel number, the virtual channel number is shown in the text box and the original digital channel is shown below as a reference. Memory (Figure 1) After the available channels have been memorized with Memorize, weaker channels viewed with Ant-A or Ant-B can be added. Unwanted channels for Ant-A, Ant-B, or Ant-DTV can also be deleted. Use the CH or button on the remote control to see the channels in memory. Use Adjust or to select Added or Deleted for the channel shown in the “Channel” option box. Name (Figure 1) Channels shown on Ant-A or Ant-B can be named (up to four characters). After you enter a name, it will appear on the TV screen, next to the channel number. 1. Use Adjust or to select each letter 2. Press ENTer to set the letter and move to the next letter position. 3. Press CANCEL to move back one position. 46 Antenna Menu: SuperQuickView™ (SQV™) Figure 1. Antenna Menu SQV (SuperQuickView™) Using The Menu Screen (Figure 1) SQV (SuperQuickView™) allows you to put together lists of your favorite channels from Ant-A, Ant-B and Ant-DTV. You can store channels in any of the 9 different SQV memory banks. Also, you ca...

Herunterladen

Geben Sie zwei Ziffern: