Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: JVC Dateigröße: 2.33 mb Dateiname: Unterrichtssprache:

......... ................. ......... ............... ......... ............... ........... ......... ........... ... ... ............... ........... ... ....... ..... ..... . ..... ..... ......... ......... . ......... . ....... ............... ..... ......... ......... . ......... . ..... . ..... . ................. ............... ..... ................. ..... ... ......... . ......... . ..... ... ..... ......... . ........... ........... ............. ..... ........... ..... ..... ................... ........... ..... ......... . ..... ........... ........... ......... . ............. ... ..... ... ............. ........... . . ............. ........... ... ... ... ........... ......... . ......... . ... ........... ... ......... . ........... ........... ............. Chart 2. AV Receiver Inputs NetCommand™ Setup provides an edit option so you may delete a type of product you do not have, change the inputs you used for connecting each device or add devices not included in the presets above. See Editing NetCommand™ Setup later in this chapter. See Connection Helpful Hints, inside back cover, for additional information. 15 NetCommand™ Supported Devices Following is a list of devices, by several manufacturers, tested and shown to be compatible with the NetCommand™ control system. When you use these devices you will be able to control them without changing the setting of the remote control from TV to another product. NetCommand™ Compatible Legacy Devices ......... ... ............... ......... ..... ..... ................. ..... ........... ..... ............... ................... ............... ............. ........... ............... ............. ............... ............. ....... ................... ... ................... ... ......... ............... ............... ....... ....... ........... ............. ..................... ............. ............. ............... ................. ........... ................. ............... ............. ............. ............. ............. ................. ........... ..... ............... ......... ....... ............. ........... ............. ........... ................. ....... . ............... ................. ........... ................. ............... ............... ............. ............. ............... ............. ................. ............... ........... ..... ................. ............. ......... ............... ................... ............... ....... ......... ............... ....... ................. ............. ................... ..................... ..... ................. ............. ............. ............... ............. ......... ........... ................. ............... ................. ........... ............. * XBox™ requires the DVD kit from Microsoft ** Playstation® 2 requires the DVD Remote Controller kit from Sony; DVD Player software disc version 2.10 NetCommand™ may be able to operate additional models since many manufacturers use the same control signals to operate some or all of the models they offer. The above chart lists only the models that have been tested with NetCommand™. For each Manufacturer, models other than specified above may be compatible. For devices not supported by NetCommand™, you will need to use the original remote control of the device or program the TV remote to operate these devices in the traditional manner. 16 Connecting Antenna or Wall Outlet Cable for Digital Broadcasts Figure 1. Antenna or wall outlet cable. Antenna or Wall Outlet Cable for Digital Broadcasts For cable or antenna with coaxial lead (Figure 1) 1. Connect the incoming cable to ANT-DTV on the TV back panel. Additional connection cables are not provided with the TV. They are available at most electronic stores. IMPORTANT Mitsubishi strongly recommends against using antennas with twin flat leads. Twin flat lead antenna wires are subject to interference which may adversely affect the performance of the TV. We recommend using coaxial antenna cable. Connecting an Analog Antenna, Wall Outlet Cable, or Cable Box Separate UHF and VHF Antennas (Figure 2) 1. Connect the UHF and VHF antenna leads to the UHF/VHF combiner. 2. Push the combiner onto ANT-A on the TV back panel. Note: UHF/VHF combiners are not provided with the TV. They should be available at most electronic stores. Mitsubishi strongly recommends against using antennas with twin flat leads. Twin flat lead antenna wires are subject to interference which may adversely affect the performance of the TV. We recommend using coaxial antenna cable. Figure 2. Connecting separate UHF and VHF antennas. 17 Connecting an Analog Antenna, Wall Outlet Cable, or Cable Box, cont’d. Antenna or Wall Outlet Cable for Analog Broadcasts. (Figure 2) For antennas with twin flat lead 1. For antenna with twin flat leads, connect the 300Ohm twin leads to the transformer. 2. Push the 75-Ohm side of the transformer onto ANT-A on the TV back panel. Note: 300-Ohm ...

Herunterladen

Geben Sie zwei Ziffern: