Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Hitachi Dateigröße: 2.33 mb Dateiname: Unterrichtssprache:

Video SectionAudio Section When you press the DEVICE button on your remote control, the Device Selection menu appears. When NetCommand™ has not been setup, the Device Selection menu allows you to select the input for viewing. When NetCommand™ is setup the Device Selection menu allows you to select the device for viewing, select audio from the TV speakers or A/V Receiver, power compatible devices On or Off, and verify the destination of signals. Additional Device Selection menu functions are Connection SectionDevice SectionFigure 1. Device Selection menu after NetCommand™ has been setup. Video SectionAudio Section When you press the DEVICE button on your remote control, the Device Selection menu appears. When NetCommand™ has not been setup, the Device Selection menu allows you to select the input for viewing. When NetCommand™ is setup the Device Selection menu allows you to select the device for viewing, select audio from the TV speakers or A/V Receiver, power compatible devices On or Off, and verify the destination of signals. Additional Device Selection menu functions are Connection Section explained in the NetCommand ™ Guide. Device Section When the Device Selection menu is displayed, the Device or Input you are currently viewing shows a gold-colored icon. To select another device or input, use the ADJUST button, or to move the yellow highlight among the devices. Press ENTer to select the device you would like to view and hear. The TV inputs are automatically changed. If NetCommand™ is setup, the inputs on compatible A/V Receivers are automatically changed at the same time. Power On/Off Devices Some devices will power On automatically when you select to use the device. These devices will power Off automatically when you turn Off the TV. For devices that do not power On or Off automatically display the Device Selection menu, ADJUST or to highlight the device icon and press POWER on the remote control. For the A/V Receiver, press the AUDIO button to move the navigation to the Audio Section. Highlight the A/V Receiver icon and press POWER. If you press POWER on the remote control when the Device Selection menu is not displayed, the TV will turn Off. Audio Section When a NetCommand™ compatible legacy IR controlled A/V Receiver, or HAVi amplifier has been connected to the TV and added to NetCommand™ Setup, an icon for this device will appear in the audio section. Use the AUDIO button to change navigation to the audio section. Then use the arrow buttons to select the TV speakers icon or the A/V Receiver icon. Press ENTer to change the audio selection. Use the DEVICE button to return the navigation to the Device Section. Video Section The TV icon is the destination for the currently selected device. This is shown in the Video Section. Connection Section The Connection Section shows the other devices that are currently connected to the device highlighted in the Device Section. For example, if the Digital VHS (D-VHS) is currently recording from ANT-DTV, when you move the highlight to the ANT-DTV icon, the D-VHS icon will appear in the Connection Section. This icon will disappear when you move the highlight to another icon. 39 Only devices that were designed by their manufacturers to respond to separate On and Off remote control signals will be able to turn On automatically. Not all manufacturers provide this ability for their products. IMPORTANT PIP/POP Selection Menu PIP Device Selection Menu Figure 1 When you press the PIP DEVICE button on the remote control, the PIP Selection menu displays. The PIP Selection menu is similar to the Device Selection menu except the source for the sub picture in the Video Section is selected and the Audio and Connection Sections are not displayed. or to move the yellow highlight to the Device you want to show in the PIP or POP image then Press ENTer. Device icons in gray are not available for use as PIP/POP sources. Use the ADJUST Video Section DeviceSection Figure 1. PIP Selection Menu 40 Menu Screens (Overview) Figure 1. Setup Menu Setup Menu (Figure 1) You can add, change, review or delete NetCommand™ settings and devices. You can also change the order of icons displayed on the Device Selection menu, select convergence adjustment, turn on or off the transport menu, and select English or Spanish as the language for the menus and on- screen displays. Antenna Menu (Figure 2) Use to memorize locally available channels for Ant- A, Ant-B and Ant-DTV. You can manually add or delete channels from memory, name channels for Ant-A and Ant-B, or add your favorite channels to a SQV (SuperQuickView™) list. Figure 2. Antenna Menu Figure 3. Clock Menu Clock Menu (Figure 3) Manually set the time for the TV, or select Auto and the TV will automatically set the time based upon Extended Data Service (XDS) time data. This time data is usually broadcast by your local PBS station. 41 Menu Screens (Overview) Captions Menu (Figure 1) Display Closed Captions if sent by the broadcaster. Select the backgr...

Herunterladen

Geben Sie zwei Ziffern: