Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Hitachi Dateigröße: 2.33 mb Dateiname: Unterrichtssprache:

NetCommand™ supports the automatic switching of audio and video inputs using only the TV Remote Control. IMPORTANT You may use your TV without setting up NetCommand™. You may also setup NetCommand™ at a later time by choosing Setup from the Main menu, then select Edit NetCommand™. Language Screen Figure 1 The Language screen is the initial menu displayed the first time the TV is turned On. You will need to select the language you would like to use. When you change your selection from English to Spanish, all screens automatically change to Spanish. To change Language later, go to Setup in the Main Menu. Figure 1. Setup-Language screen. Information Screen Figure 2 The Information Screen describes how to proceed with or cancel the initial NetCommand™ Setup. NetCommand™ Setup is initialized automatically the first time you power On your new TV. If, for any reason, your NetCommand™ Setup is cancelled before completing, follow the steps below to start NetCommand™ setup later. 1. Display the TV Main menu. 2. Select the Setup menu. 3. Select the Edit NetCommand™ option in the Setup menu. 4. Select Initial on the Edit NetCommand™ menu Result: The AV Receiver screen displays. Figure 2. NetCommand™ Info screen. 28 Figure 1. A/V Receiver screen. NetCommand™ Setup, cont’d. A/V Receiver Screen Figure 1 The A/V Receiver screen allows you to select the manufacturer of the A/V Receiver you are currently using. When a compatible model is used, NetCommand™ will be able to change inputs and adjust volume on the A/V Receiver. The bottom of the screen shows the model optimized for NetCommand™. Other models from the same manufacturer are often compatible. If the manufacturer’s name is followed by a number, this indicates additional models are optimized. Select “Other” if you have an A/V Receiver or stereo system from a non-compatible manufacturer. NetCommand™ will not be able to control that A/V Receiver. Select “None” if you do not have an A/V Receiver or a stereo system. Cable Box Screen Figure 2 The Cable Box screen allows you to select the manufacturer of the cable box you are currently using. If “Other” is selected for the Manufacturer, then NetCommand™ cannot control the device (use the layer switch on the remote control or use the remote for the device). The bottom of the screen shows the model optimized for NetCommand™ programming. Other models from the same manufacturer are often compatible. If the manufacturer’s name is followed by a number, this indicates additional models are optimized. For the Manufacturer, select “None” if you don’t have a Note: Your Cable Box should be connected to Ant-B or cable box. your VCR. Also, Channel 3 is the default output channel for the Cable Box. If either the connections or output channel are different, use the Change option in the Edit NetCommand™ menu to apply the changes. VCR Screen Figures 3 The VCR screen allows you to select the manufacturer of the VCR you are currently using. If “Other” is selected for the Manufacturer, then NetCommand™ cannot control the device (use the layer switch on the remote control or use the remote for the device). The bottom of the screen shows the model optimized for NetCommand™ programming. Other models from the same manufacturer are often compatible. If the manufacturer’s name is followed by a number, this indicates additional models are optimized. For the Manufacturer, select “None” if you don’t have a VCR. Figure 2. Cable box screen. Figure 3. VCR screen. 29 NetCommand™ Setup, cont’d. DBS Screen Figure 1 The DBS (Digital Broadcast Satellite) screen allows you to select the manufacturer of the satellite system you are currently using. If “Other” is selected for the Manufacturer, then NetCommand™ can not control the device (use the layer switch on the remote or use the remote for the device). The bottom of the screen shows the model optimized for NetCommand™ programming. Other models from the same manufacturer are often compatible. If the manufacturer’s name is followed by a number, this indicates additional models are optimized. For the Manufacturer, select “None” if you don’t have the device. Camcorder Screen Figure 2 The Camcorder screen allows to indicate whether or not you have a camcorder connected to the TV. You may want to reserve an input for your camcorder. While your Camcorder cannot be controlled by NetCommand™, you can still switch to the Camcorder input when you would like to view your camcorder. Keep the box checked to reserve Input 5 (Front Panel) for your Camcorder. Remove the check mark to turn off Input 5. DVD Screen Figure 3 The DVD screen allows you to select the manufacturer of the DVD Player that you are currently using. If “Other” is selected for the Manufacturer, then NetCommand™ can not control the device (use the layer switch on the remote or use the remote for the device). The bottom of the screen shows the model optimized for NetCommand™ programming. Other models from the same manufacturer are often compatible. If the man...

Herunterladen

Geben Sie zwei Ziffern: