Stimmen - 1, Durchschnittliche Bewertung: 4 ( )

Hersteller: JVC Dateigröße: 2.33 mb Dateiname: Unterrichtssprache:

The buttons on the Front Control Panel highlighted in gray are duplicated on the remote control. The top row of labels show the control functions when there are no TV menus displayed on the screen. The bottom row of labels show the control functions when the TV menus are displayed on the screen or when a special function has been activated. See Remote Control Functions: Overview, for further details on the functions of these buttons. System Reset If the TV will not respond to either the remote control or the front panel controls and will not power off, press the SYSTEM RESET button with a pointed item like the end point of a paperclip. The TV turns Off and the TIMER light flashes quickly for about one minute. When the TIMER light stops flashing, you may turn on the TV again. The changes you made while the TV was On before you used the SYSTEM RESET button may be cancelled, however, the changes you made previously are not cancelled. Power/Timer The green light is a multi-function indicator. Each time the TV is plugged into the wall electrical outlet, when power is restored after a power failure, or after using the SYSTEM RESET button, this light will flash rapidly for about one minute. Do not attempt to turn on the TV during this period. Wait for the flashing to stop before attempting to turn the TV on. While the TV is powered on, the light illuminates steadily. If the TV has been programmed to turn on automatically using the Timer feature, this light will flash slowly while the TV is powered off. A/V Reset Press this button to reset all A/V memories to the factory default settings. Input 5 This input can be used for convenient connection of a camcorder or other video device to the TV. Please note that if you connect to the S-VIDEO terminal, the VIDEO terminal is deactivated. The VIDEO terminal is active when there is no S-Video connection. 12 Back PanelBack Panel .. Inputs 1-4 These inputs can be used for the connection of a VCR, Super VHS (S-VHS) VCR, DVD player, standard satellite receiver or other A/V device to the TV. Please note that if you connect to the S-VIDEO terminal, the VIDEO terminal is deactivated. The VIDEO terminal is active when there is no S-Video connection. .. Output (Monitor and PIP) The Monitor Output sends the TV audio and video signals from Ant-A, Ant-B and Inputs 1-5 to an A/V Receiver or other analog A/V equipment. Monitor Output will also provide the signals, converted to analog signals, received from Ant-DTV and IEEE-1394 products. There will be no video signals from digital products if the original signals are copy protected. From VGA, Component 1 and 2 and Input-DTV, no signals will be sent. The PIP output sends the PIP’s or POP’s audio signal to an amplifier or wireless headphones. If no PIP or POP is displayed, the PIP output will not send any audio. .. Antenna (ANT-A, LOOP OUT, and ANT-B) ANT-A and ANT-B receive analog NTSC signals from VHF/UHF antennas or an analog NTSC cable system. LOOP OUT sends the ANT-A signal out to another component, such as a cable box or VCR. 4 IR Emitter-Repeater Connecting IR emitters here allows the TV to pass IR commands from most IR remote controls to other A/V devices that are out of range of the remote control. 5 VGA This input can be used for the connection of a computer. Please see Appendix B for signal compatibility. 6 Component Inputs 1-2 These inputs can be used for the connection of A/V equipment with component video outputs, such as a DVD player. Please see Appendix B for signal compatibility. 7 DTV Input This input is used to connect an external DTV receiver, and can be configured for HDTV signal types component (YPrPb), RGB sync on green, and RGB plus H&V. Please see Appendix B for signal compatibility. 13 Back PanelBack Panel Antenna DTV (ANT-DTV) 8 This input receives digital TV signals from a VHF/UHF antenna or unscrambled digital cable system. If the TV receives scrambled cable signals on this input, it will not be able to decode them. In this case, your cable company must provide a decoding box. 9 IEEE-1394 Input/Output These jacks allow the TV to connect to one or more external digital products by means of a single cable. Three jacks are provided for this purpose, which allow for a high degree of flexibility for connecting your system together. Please refer to the NetCommand™ Guide for IEEE-1394 device connection details. 10 Digital Audio Output This output provides digital audio streams, such as Dolby Digital, PCM or MPEG digital audio, received in the signal from the ANT-DTV input or the IEEE-1394 devices. This output is intended to be connected to an external audio receiver that is capable of decoding the digital streams and converting them to analog signals suitable for driving loudspeakers. This output does not send a signal while analog devices connected to other inputs are being used. 11 IR Emitter-Home Theater Control Output Two jacks are provided for connecting IR emitters. IR Emitters connected to these jacks are used...

Herunterladen

Geben Sie zwei Ziffern: