Stimmen - 2, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: Electrolux Dateigröße: 808.74 kb Dateiname: Unterrichtssprache:

4.2 Starting The pan must be in the horizontal position prior to starting, orthe power supply must be disconnected. 4.3 Automatic cooking TT Button, activation of settings LT Lamp, cooking temperature DT Button, cooking time LD Lamp, cooking time expires ZT Button, starting time LZ Lamp, starting time LR Lamp, soft settings Q Button, acoustic signal R Button, soft LS Lamp, temperature pre-setting AT Display, cooking temperature T Temperature selection knob AD Display, remaining cooking time D Cooking time knob AZ Display, time Z Starting time knob S Control switch Fig. 2 Right console Switching on Switch on the control switch (S) turn from position 0 to I. Thisswitches on the temperature pre-setting function. The lamp(LS) lights up. 0 = Off I = On Set the desired cooking temperature (flashing nominal value) with the temperature selection knob (T) on the display(AT). Turn right = increase Turn left = reduction Smallest change = 1°F Programming the cooking time, the starting time and steam condensation in the compartment (or only one function). The starting-time programme only exists as an option. Pressing the button (DT) switches on the programme for the cooking time (flashing nominal value). The desired cooking time is set with the cooking time knob (D) on the display (AD). Turn right = increase Turn left = reduction Smallest change = 1 minute The lamp (LD) only lights up when the desired temperature has been reached and the cooking time expires. Pressing the button (ZT) switches on the programme for the starting point (flashing nominal value). Set the desired starting time with the starting time knob (Z) on the display (AZ) Turn right = increase Turn left = reduction Smallest change = 1 minute The acoustic signal will sound three times and the lamp (LZ) will light up when the starting time has been reached. Steam condensation (optional) is pre-programmed by pressing button (V). The following pre-programmed nominal functions • Cooking temperature • Cooking time • Starting time • Steam condensation are all activated by pressing the button (TT). The following displays • Cooking temperature (AT) • Remaining cooking time (AD) • Clock time (AZ) indicate the current value. The lamp (LT) will continue to flash until the nominal cookingtemperature is reached. It then stays on permanently. When illuminated, this lamp (LV) indicates that steam condensation is switched on. When cooking is completed, steam condensation will start automatically and will remain in operationuntil the pressure in the appliance has been reduced to normal. The lamp (LV) will flash during the cooling phase. 4.4 Shutting down An acoustic signal sounds when cooking is over. This is acknowledged by pressing the button (Q). The power supply is then switched off. All activated functions are subsequently switched off: • Press the pre-set temperature button (TT) for some seconds. Lamp (LT) extinguishes. • Press the cooking time button (DT). Lamp (LD) extinguishes. • Press the starting tim...

Herunterladen

Geben Sie zwei Ziffern: