A (3-98) LOCKING SCREW FEEDER/LID WRENCHCUTTING TOOL PUSHER FEED TUBE PUSHER PLATE PUSHER PLATE SHAFT LOCKING KNOB DICING GRID EJECTOR PLATE PL-52142 FP150 Food Processor TABLE OF CONTENTS GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . 3 INSTALLATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Reconnect the power supply and push the MIX-GRIND START switch to verify that both the worm and the mixer arm rotate counterclockwise as viewed from the front of the machine. – 5 – CONTROL BOX HEATERS The Mixer-Grinder has a heater in the control box and another heater in the front control panel to keep the controls dry. They are automatically ON when the machine is electrically connected. The Mixer- Grinder should always be connected EXCEPT when performing assembly, disassembly, cleaning, or ma

B (Aug. 2001) MODEL MG1532 MIXER-GRINDER MODEL MG2032 MIXER-GRINDER © HOBART CORPORATION, 1997 – 2 – Installation, Operation, and Care of MG1532 & MG2032 MIXER-GRINDERS SAVE THESE INSTRUCTIONS GENERAL The MG1532 & MG2032 Mixer-Grinders are designed to use a #32(42/46) size knife and plate (knives and plates are available at extra cost but not included with grinder). Do not use a plate with hole size smaller than 3/32". The MG1532 Mixer-Grinder is equipped with either a 5 or 71/2 HP Grind Motor a

B (3-98) Installation, Operation, and Care of Model FP100 Food Processor SAVE THESE INSTRUCTIONS The Model FP100 Food Processor is used for slicing, shredding, grating, Julienne cutting and dicing vegetables, fruits or cheese. The compact unit is designed for ease of operation and quick cleaning. Immediately after unpacking the food processor, check for possible shipping damage. If the unit is found to be damaged after unpacking, save the packaging material and contact the carrier within 15 d

2 ELECTRO-MECHANICAL TIMER CONTROLS (when equipped) The START button is used to start the mixer. The STOP button is used to stop the mixer. The TIMER is used in conjunction with the START button for timed mixing operations and will stop the mixer when a preset time has elapsed. For non-timed mixing — Set the timer on HOLD and use the STOP button to stop the mixer. PL-40143-1 Start Button Timer Stop Button Gear Shift Lever Fig. 3 – 5 – PROGRAMMABLE TIMER CONTROLLER (when equipped) At Idle, the ti

Maximum Security Correctional Package ACCESSORIES . 3-Pack Plates: 1.16, 5.32 slicer plates, 3.16 shredder plate, 1 wall rack . 6-Pack Plates: 1.16, 5.32, 3.8, 7.32 slicer plates, 3.16 shredder plate and 3.8 dicer plate, 2 wall racks . 3-Peg Wall Rack: designed to hold three plates for additional plate storage . Slicer Plates: 1.16, 5.32, 7.32, 3.8, 5.8* and 3.8 HD, 1.2; 3.16 crimping plate; soft dice 5.16, 3.8, 1.2, 5.8 . Julienne Plates: 3.32, 3.16, 5.16 . Dicer Grids: 9.32, 3.8, 1.2, 5.8, 3.4