You will be prompted to fully tighten all fasteners later. Place the Base Frame (1) on the floor. Cap the Base Frame (1) with one 2" Sq End Cap (48) and two 1-3/4" Sq End Plugs (49). Insert two 1" Plastic Bushings (60) into the holes in the Base Frame (1). Cap the Side Base (2) with one 2" Sq End Cap (48) and one 2" Sq End Plug (50). Cap the Upright (3) with one 1-1/2" End Cap (53) and one 2" x 3" Rect End Plug (52). Attach the Adj Stopper (63) to the Upright (3). Attach the Side Base (2) and Up

Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your EVO home gym. Name: Phone Number: Receipt: Open the boxes You are now ready to open the boxes of your new equipment. Make sure to inventory all of the parts that are included in the boxes. Check the Parts List for a full count of the number of parts included for this product to be assembled properly. If you are missing any parts or have any assembly questions contact your local Smoot

This Warranty does not apply to any product shipped or handled outside of the United States. This Warranty does not apply if the product is used for rental or commercial use. Consequential and incidental damages are not recoverable under this Warranty. (Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.) THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER EXPRESS WARRANTIES. ALL IMPLIED WARRANTIES, I

You will be prompted to fully tighten all fasteners later. Place the Base Frame (1) on the floor. Cap the Base Frame (1) with the 2" X 3" Rect End Plug (42). Cap the Rear Stabilizer (2) with two 1-3/8” x 3” Rect End Caps (41). Attach the Rear Stabilizer (2) to the Base Frame (1) using two 1/2" x 3" Hex Head Bolts (62), six 1/2" Washers (74) and four 1/2" Nylon Nuts (76) as shown in FIG 1. Cap the Upright (3) with the 2" x 3" Rect End Plug (42). Attach the Bumper (45) to the horizontal tube on th

MILLIMETERS 0 10 20 30 40 50 60 70 80 90 100 hardware 8 Screw M4 x 19mm (4 pieces) 55 Screw #8 x 19mm (4 pieces) 16 Screw M6 x 20mm (2 pieces) 17 Screw M8 x 15mm (4 pieces) 121 Screw M8 x 19mm (4 pieces) 40 Metal Cap (2 pieces) Allen Wrench (1 piece) Wrench (1 piece) Wrench (1 piece) Wrench (1 piece) 130 Screw M6 x 15mm (2 pieces) 46 Bolt M8 x 78mm (2 pieces) 4 Safety Key (1 piece) Step 1: Remove your EVO 1CD Treadmill from the carton and place it on the floor in an open area as shown in FIG-1.

TOLL FREE CUSTOMER SERVICE NUMBER: 1.888.800.1167 SERIAL NUMBER (found on frame): EVO 3i MOTORIZED TREADMILL 2 EVO 3i MOTORIZED TREADMILL 2 PRECAUTIONS For future service or related questions: Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your Smooth Fitness treadmill. Name: ______________________________ Phone Number: ___________________ Receipt: ______________________ Precautions: WARNING: To reduce the risk of burns, fire, electri

Description Qty. Order No. No. Description Qty. Order No. 59 Motor Hood 1 EVO3-59 89 Bushing 4 EVO3-89 60 #8 x 50mm Screw 2 EVO3-60 90 M10 x 60mm Bolt 2 EVO3-90 61 62 63 Side Rail (R & L) Deck End Cap - Left Running Belt 2 1 1 EVO3-61 EVO3-62 EVO3-63 91 92 93 Deck Frame Motor Hood Side Cover Right Motor Hood Side Cover Left 1 1 1 EVO3-91 EVO3-92 EVO3-93 64 Deck End Cap - Right 1 EVO3-64 94 Frame Side Cover - Right 1 EVO3-94 65 Rail Guide 8 EVO3-65 95 Frame Side Cover - Left 1 EVO3-95 66 M8 x 25m

The resistance will be changed automatically while exercising, according to the following profile. To increase or decrease the resistance while exercising, press the UP/DOWN button. To pause the program while exercising, press the STOP button. To resume exercising, press the START button. If the RESET button is pressed after pausing the program, the computer returns to Power on Status. To return to the program mode press and hold the ENTER button. Interval Profile: (One complete cycle lasts 16 m

This chart is provided to help you identify those items that may be unfamiliar to you. NO. DESCRIPTION QTY. 5 M6 X 20mm Screw 2 11 #8 x 12mm Screw 8 12 Plastic Fixing Insert 4 21 M8 x 80mm Allen Head Bolt 2 22 Metal Cap 2 23 Connection Plate 2 31 M6 x 12mm Screw 4 32 Plastic Cover 2 35 M8 x 15mm Allen Head Bolt 4 104 M8 x 50mm Allen Head Bolt 4 A Wrench 1 B Wrench 1 C 6mm Allen Wrench 1 MILLIMETERS EVO1 MOTORIZED TREADMILL 6 EVO1 MOTORIZED TREADMILL 6 PARTS LIST No. Description Qty. Order No. No

Plug the power cord back into the surge protector and run the treadmill at 2.5 mph. You should see the belt start to correct itself, moving back towards the center. Repeat the above procedure until the walking belt is centered. It may be necessary to set walking belt tension once you have completed this procedure if the belt feels like it is slipping while walking. Refer below to the "Walking belt slipping" instructions. • Walking belt has shifted to the right: First unplug the power cord from t