(1) The Model Number can be found on the maintenance label on top of the motor shroud or on the bar code label on the rear of air tank. (2) The Date Code Number can be found on the bar code label on the rear of the air tank. (3) The Serial Number can be found on the bar code label on the rear of the tank. (4) The Tank Registration Number is located on the metal data plate which is welded onto the backside of the air tank. (This data plate is painted the same color as the tank.) Retain these numb

Parts List • Espaflol, p. 10 Estates, IL 60179 U.S.A. TABLE OF CONTENTS Page Warranty .................................................................................... see below Safety Instructions........................................................................ 1 ImportantSafety Instructions& Guldef=ne_......................................... 1 Spec_ffcabol18....................................................................................... 2 (31os._'y-. .........................

3. Fill pump and suction pipe with water. Figure 9 -Run Ten Minutes Or Less If no water is produced within 10 minutes, stop pump, release all pressure, remove priming plug, refill and try again. [AWARNING] Hazardous pressure and risk of explosion and scalding. If pump is run continuously at no flow (that is, with discharge shut off or without priming), water may boil in pump and piping system. Under steam pressure, pipes may rupture, blow off of fittings or blow out of pump ports and scald anyon

Compressors PC2011 1.5 hp Electric Wheelbarrow Oil-Splash Compressor Powerful 1.5 hp electric oil splash compressor with wheelbarrow design for better portability. Benefits • Durable cast iron cylinder for extended wear • Dual control for constant run or on/off operations • 7.2 cfm @ 40 psi 6.5 cfm @ 100 psi Applications Framing and Sheathing, Roofing and Decking PC2012 5.5 hp Honda® Engine Wheelbarrow Oil-Splash Compressor Powerful wheelbarrow oil splash compressor with 5.5 hp Honda

A suggested multiple discharge to service is shown in Figure 3. Do not use in a pressure tank or booster pump application. Pump/Piping Installation PUMP INSTALLATION NOTICE: Use Teflon tape supplied with the pump for making all threaded connections to the pump itself. Do not use pipe joint compounds on the pump: they can react with the plastic in the pump components. 1. Bolt pump to solid, level foundation. 2. Support all piping connected to the pump. 3. Wrap 1-1/2 to two layers of Teflon tape c

(1) The model number which can be found on the tabel on the rear of the air tank. (2) The code number which can be found on the foil tabel on the rear of the air tank. (3) The Manufacturers Number (MFG.,.) {ASME Code Compressors onty) is located on the metst date plate which is welded onto the backside of the air tank. (This data plate is painted the same cotor as the tank.) (4) The Motor Manufacturers name which is mocated on the motor tabel or specification plate. (5) The Motor Mfg. number-ats

The following schedule is geared toward a consumer whose compressor is used in a normal working environment on a daily basis. If necessary, the schedule should be modified to suit the conditions under which your compressor is used. The modifications will depend upon the hours of operation and the working environment. Air compressors used in an extremely dirty and/or hostile environment will require a greater frequency of all maintenance checks. Oil Changing For changing the pump oil, be sure to

psi; 8.9 cfm @ 100 psi Applications Framing and Sheathing, Roofing and Decking Contractor Series PC2013 2.0 hp Wheelbarrow Oil-Splash Compressor Powerful wheelbarrow oil-splash compressor with 20 hp motor for superior performance. Benefits • Durable cast iron cylinder for extended wear • Dual control for constant run or on/off operations • 8.5 cfm @ 40 psi 7.2 cfm @ 100 psi Applications Framing and Sheathing, Roofing and Decking Contractor Series Compressors PC2G14 B.5 hp Hond

HAZARD WARNING: Risk of explosion or fire What Could Happen How To Prevent It It is normal for electrical contacts within the motor and pressure switch to spark. Always operate the compressor in a well ventilated area free of combustible materials, gasoline, or solvent vapors. If electrical sparks from compressor If spraying flammable materials, locate come into contact with flammable compressor at least 20 feet away from vapors, they may ignite, causing fire or spray area. An additional length

• Safety instructions • Installation & Operation • Maintenance & Storage • Troubleshooting Guide • Parts List • Espa_ol, p. 10 Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. 06/17#2004 Part NO. E100731 TABLE OF CONTENTS Page Warranty ...................... ,................................................................................ see below Safety Instructions ................................................................................................. 1 Important Safety Inst