Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung American Dryer Corp., modell HDG5300AW

Hersteller: American Dryer Corp.
Dateigröße: 3.01 mb
Dateiname:

Unterrichtssprache:

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Before you throw away your old dryer, take off the door so that children may not get trapped inside. Thank you for using our Haier product. This easy-to-use manual will guide you in getting the best use of your dryer. Remember to record the model and serial number. They are on a label in back of the dryer. Staple your receipt to your manual. You will need it to obtain warranty service. 4 Model number Serial number Date of purchase English INSTALLATION INSTRUCTIONS DVWARNING A CAUTION R tisk of Fire: 1. Clothes dryer installation must be performed by a qualified installer. 2. I nstall the clothes dryer according to the manufacturer's instructions and local codes. 3. Do not install a clothes dryer with flexible plastic venting materials. If flexible metal (foil type) duct is installed, it must be of a specific type identified by the appliance manufacturer as suitable for use with clothes dryers. Flexible venting materials are known to collapse, be easily crushed and trap lint. These conditions will ostruct clothes dryer airflow and increase the risk of fire. 4. To reduce the risk of severe injury or death, follow all installation instructions. Tools and materials required • Phillips-Head and flathead screwdrivers • Channel-lock adjustable pilers • 1/2-inch open-end wrench • Carpenter's level • Measuring tape (12ft. min.) • Duct tape • Pipe thread sealer (Gas) • Rigid or flexible metal 4 inch (102cm) duct • Vent hood ^ Safety Warning: 1. Before starting installation, make sure that the gas shut off valve is in the off position. 2. All old gas connectors and gas piping should be discarded. ELECTRICAL REQUIREMENTS (Electric Dryers) Model Numbers: (chde/hde5000AW and chde/hde5300AW) Circuit Individual 30 Amp branch circuit fused with 30 Amp time-delay fuses or circuit breakers. 5 English Power Supply 3 or 4 wire, 120/240 Volt, 1 Phase, 60Hz, AC Power Supply Cord Kit (Not supplied when sold in US. Must be purchased to meet local electrical codes.) The dryer MUST employ a 3-conductor power supply cord NEMA 10-30 Type SRDT rated at 240 Volt AC minimum, 30 Amp, with 3 open end spade lug connectors with upturned ends or closed loop connectors and marked for use with clothes dryers. (When sold in Canada - 4-wire power supply cord provided and attached on dryer) Dryers being installed in a manufactured (mobile) home MUST employ a 4-wire power supply cord NEMA 14-30 type SRDT or ST (as required) rated to 240 Volt AC minimum, 30 Amp, with 4 open-end spade lug connectors with upturned ends or closed loop connectors and marked for use with clothes dryers. See Electrical Connections for more information on a 4-wire system. Outlet Receptacle NEMA 10-30R receptacle should be located so the power supply cord is accessible when the dryer is in the installed position. (Canada - NEMA 14-30R receptacle) ELECTRICAL REQUIREMENTS (Gas Dryers) Model Numbers: (HDG5000AW and HDG5300AW) Circuit Individual 15 Amp branch circuit fus...