Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Bosch Dateigröße: 3.01 mb Dateiname: Unterrichtssprache:

The dryer will stop and1 then tumble for a brief period every few minutes. Press the wrinkle saver button to activate. Stop the setting at any time by pressing the wrinkle saver button or opening the dryer door. This feature will work for 1 hour after the drying program is complete. • Press the "Anti Bacterial" button. • This function can be selected only in certain cycles. Here the heat temp is raised to the highest dry level. This option can only be used with heavy, bulky items, white and normal cycle. NOTE: Cannot use on delicate fabrics • Press the "Damp Dry Signal" button. • If activated the dryer will beep when the load is approximately 80% dry. This will allow you to remove light weight or other items that you may wish to iron. • Press Start/Pause button. • When starting the machine, close the door first, then press this button. • If a pause is needed during drying, press this button. Pressing again will resume operation. _______ Cycles Time Temp Set Dryness Level Signal Wrinkle saver Anti bacterial Damp signal Auto Dry Normal 42 High * Normal * * * * * White 55 Medium* Normal * * * * * Heavy 50 High * Normal * * * * * Bulk items 52 * Medium Normal * * * * * Delicate 35 Low * Normal * * it * Press free 35 Low * Normal * * * * Manual Dry Speed Dry 25 High* / * * Rack Dry 50 Air Dry * / * it Timed Dry 30 High* / * it Touch Up 25 Low * / * * * means can be Preprogrammed, 29 English MANUAL DRY CYCLE HDE/HDG 5300AW, CHDE5300AW 1. Touch power On pad to power on. 2. Touch "Manual Dry Cycles" pad and select Timed Dry cycle, Speed Dry or Touch Up cycles. 3. Touch "More Time" and "Less Time" pads to set a suitable time. • After setting you can press either of these two pads to increase or decrease drying time as you desire. 4-6. Touch pads "Temperature," "Signal," "Wrinkle Saver," to define your desired program. NOTE: For "Manual" program, use of pads "Temperature," "Signal," "Wrinkle Saver," is the same as for auto-programs. "Anti-Bacterial", "Damp Dry" and "Dry Level" are inactive, and 2 beeps will sound if touched. 7. Touch "Start/Pause" pad to activate cycle. 30 English MANUAL DRY CYCLE o o o HDE/HDG 5000AW, CHDE5000AW 1. Press power ON button to power on. The control panel will beep once and the dryer will change from "OFF" to the operating status. If Start/Pause button is not pressed in five minutes after powering on, the dryer will automatically return to OFF status. 2. Set the cycle select dial to Manual Dry Cycle. 3. Press "More or Less Time" button to set the required drying time. 4-6. Press "Temperature," "Signal," "Wrinkle Saver," to define the required programs. NOTE: For "Manual Dry" program use of "Temperature," "Signal," "Wrinkle Saver," is the same as for auto-programs. "Anti-Bacterial," "Damp Dry Signal" and "Dry Level" are inactive, and 2 beeps will sound if pressed. 7. Touch "Start/Pause" button to activate cycle. RACK DRY CYCLE HDE/HDG 5300AW, CHDE5300AW 1....

Herunterladen

Geben Sie zwei Ziffern: