Stimmen - 5, Durchschnittliche Bewertung: 4.2 ( )

Hersteller: Haier Dateigröße: 3.01 mb Dateiname: Unterrichtssprache:

This will allow you to remove lightweight items that are dry or other items that you may wish to iron. This feature is available for "Auto Dry" cycles only. 23 English Custom Program: (11) • This allows you to save a favorite cycle,set the desired settings and press "Custom Program"button for 3 seconds. A beep will sound to indicate the cycle has been saved. To recall your custom cycle ,press the "Custom Program"button before drying a load. To change the saved cycle,set the desired settings and "Custom Program"button must be pressed again for 3 seconds. You can also program Anti-Bacterial, Wrinkle Saver and Damp Dry Signal. Press custom program and press start/pause button to activate. Digital Display: (12) • Indicates the remaining time during cycle operation. Note: If the dryer has any problems, it will display an error message. Fuction Light Indicator: (13) - Child Lock: You can lock the controls to prevent any selections from being changed.Or you can lock the controls after you have started a cycle. Children cannot accidentally start the dryer by touching pads when this option is selected. To lock the dryer,press and hold "Damp Dry Signal"for 3 seconds. A single beep tone is heard and Child Lock will glow. To unlock the dryer,press and hold the "Damp Dry Signal"for 3 seconds. Check Filter: After the power button is pressed, the Check Filter indicator will H flash until Start/Pause is selected. This is just a reminder to clean the lint filter before the dry program starts. - Dry: When lit this indicates the process the cycle is currently in drying mode. - Cool Down: When lit this indicates the process the cycle is currently in cool down mode. 24 English PREPARATIONS BEFORE DRYING • Sort clothes of the same kind (cotton, synthetics, woolen) to dry. • Dark and light colored clothes should be separately dried. Fabrics prone to losing lint and those prone to adhering lint should be separately dried. Clothes prone to falling lint should be turned inside out before putting into the dryer. • Make sure buttons and ornaments on the clothes are high temperature resistant and won't damage drum surface. Before loading, the clothes should have their zippers zipped up, buttons and hooks done up and belts tied so as to avoid entanglement or other obstacles. • If possible, turn out the clothes pockets for uniform drying. • Check if clothes remain soiled. If so, wash them again, otherwise soils may be permanently set. • Small articles should be collected in a mesh bag before loading and drying, so as to avoid entanglement and ensure easy removal. • Make sure the power socket is reliably grounded. The grounding terminal should not be connected to gas or tap water pipelines. • Make sure exhaust duct has been properly connected. • Make sure lint filter is clean and properly installed. If lint filter is not in place, tumbling items could enter the exhaust system and cause damage to the dryer. NOTE: Appl ies to Auto Dry cycle and Timed Dr...

Herunterladen

Geben Sie zwei Ziffern: