If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET® tools. For the name of an Authorized Service Center in your area call 1-800-274-6848. MORE INFORMATION WMH Tool Group is consistently adding new products to th

5) to the support rod (D, Fig. 5) by tightening the hex cap screw (E, Fig. 5) against the flat on the support rod. Tighten the jam nut. 18. Raise the table to a good height and tighten two set screws on the bracket. 19. Mount the small bracket between the backside of the extension bracket and the sander using two hex cap bolts, two lock washers and two flat washers. 20. Connect the sander to the power source, turn on the power to the machine just enough to start the belt rotating and then turn o

To obtain maximum life and efficiency from your Drum Sander and to aid in using it safely, please read this manual thoroughly and follow instructions carefully. Warranty & Service WMH Tool Group warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Repair Stations located throughout the United States can provide quick service or information. In most cases, a WMH Tool Group Repair Station can assist in authorizing repair work, obtaining parts, or perf

Its purpose, aside from machine operation, is to promote safety through the use of accepted correct operating and maintenance procedures. Completely read the safety and maintenance instructions before operating or servicing the machine. To obtain maximum life and efficiency from your Sander, and to aid in using the machine safely, read this manual thoroughly and follow instructions carefully. Warranty & Service The JET Group warrants every product it sells. If one of our tools needs service or r

93...... Part No. .0VS10-093.......... Description ........Wrench....................................... Size Qty. ................ 2 94...... .0VS10-094A........ ........Arbor.......................................... ...........3/4”......................... ................ 6 95...... .0VS10-095.......... ........Hex Nut...................................... ................ 6 96...... .0VS10-096.......... ........Spring Pin................................... ...........3.5x25.............

No. Description Size Qty 4 0........612140.........................Spring...................................................................................................1 4 1........WF051210...................Flat Washer...........................................M5x12.....................................1 4 2........612115.........................Stop Handle..........................................................................................1 4 3........TS-1491061 .................He