(NOTE: The C-BCK will not work if your cable company has filled then entire TV spectrum to CATV channel 125.) [ I 38 I WH0 eEJy Video distribution system with modulators JL SB msN 3S \\ Example: Modulator set to UHF 25. Tune TV to channel 3 to watch cable (select channel using set-top box) [C3D LIMITED WARRANTY STATEMENT Linear LLC warrants this product to be free from defects in material and workmanship for 2 years. The time period will be measured using the date code labeled on t

Then connect a video source. Third, apply power and select an unused channel for the 5115 picture to appear on all the televisions. Installation Step One Locate the incoming or antenna (Usually found on the side Remove the lock screw injector and slide the cover Use the mounting holes affix the channel injector to © 1999 Mount the injector within 4” of the splitter Use mounting holes on the bottom plate to attach channel injector to the wall Disconnect the incoming CATV or antenna feed from the

warrants this product free from defects in materials period of one year from the date repair, or at its option, replace the defective obtain warranty service, call MTI for authorization (RMA) number and return Attention: Customer Service. Please put the RMA number on the outside Any implied warranty arising from the sale of the product including implied warranties of merchantability and fitness for purpose are limited to the warranty stated above. MTI shall not be responsible for losses or damag

Before Out to TVs Incoming CATV or antenna coax Now attach the supplied coax jumper back to the existing splitter and tighten all connections with a 7/16” wrench. After Mount the injector within 4” of the splitter Supplied coax jumper goes back to splitter © 1999 Out Incoming CATV or to TVs antenna coax Installation Step Two The wall plate Run a line of Cat and connect wires note: When using quad wire connect wires only to pins 1, 2, 5 and 6. Leave the resistor in place at pins 3 and 4. At the c