Login: Be sure to remove the sticker before using the clock. • Depending on the clock model, the configuration of your clock may differ somewhat from that shown in the illustration. • This product has a sweep second hand. TO START CLOCK Insert a battery into battery compartment (©) with polarity as indicated. TO SET TIME Turn the hour/minute adjuster (@) in either direction. TO ADJUST SECONDS
To use the alarm 1. Set the alarm time and switch the alarm on. 2. When the alarm time you set is reached, the alarm starts to sound. When alarm is sounding, press the SNOOZE/LIGHT button to stop it. When the snooze feature is turned on, the alarm will sound again in about 8 minutes. •You can stop the repeating alarm at any time by sliding the selector to AL OFF (ALM OFF) position. To view the current alarm time setting 1. Slide the selector to NORM (NORMAL). 2. Press HR or MIN to display the cu
Slide the selector to AL SET (ALM SET). 2. Press HR to increase the hour digits and MIN to increase the minutes digits. Holding down either button changes its setting at high speed. 3. After you set the alarm time, change the selector to NORM (NORMAL). To turn the alarm on and off Slide the selector to SNZ (SNOOZE) or AL ON (ALM ON) position to switch the alarm on, or to AL OFF (ALM OFF) position to switch it off. To use the alarm 1. Set the alarm time and switch the alarm on. 2. When the alarm
Be sure to remove the sticker before using the clock. •Before using this clock for the first time, note the insulation sheet sticking out of the battery compartment. Pull out the insulation sheet in the direction indicated by the arrow before using the clock. •After removing the insulation sheet, press the RESET button (55555). • Depending on the clock model, the configuration of your clock may differ somewhat from that shown in the illustration. Alarm Off Alarm On GENERAL GUIDE 11111SNOOZE butt
4. Press the RESET button (7). Be sure to press the RESET button (7) after replacing batteries. 5. Replace the battery compartment cover. Battery precautions • Keep batteries out of the reach of small children. If a battery is accidentally swallowed, contact your physician immediately. • Be sure to load the batteries with their positive (+) and negative (–) ends facing correctly. • Never mix old and new batteries, or batteries of different brands. • Never charge the batteries that come with the
• Press to stop the alarm. 2HR/MONTH button Press to advance the hour or month digits during time/date setting. 3MIN/DATE button Press to advance the minute or date digits during time/date setting. 4YEAR/5-AL ON/OFF button • Press to advance the year digits during date setting. • Press to turn a reminder alarm on or off. 55-AL. SET button Use this button to start a reminder alarm time setting operation. 6SET button Press to cycle through setting screens. 7RESET button Press this button to reset
• Never mix old and new batteries, or batteries of different brands. • Never charge the batteries that come with the clock. • Should batteries ever leak while in the clock, wipe out the fluid with a cloth, taking care not to let any get onto your skin. • Replace the batteries at least once a year, even if the current batteries are working properly. • The batteries that come with the clock lose some of their power during transport and storage. SPECIFICATIONS Accuracy at normal temperature: ±60 se
• Though temperature readings are displayed up to –0.1°C and greater than 40.1°C, note that such readings are actually outside the guaranteed temperature range of this clock. BATTERY REPLACEMENT Replace batteries whenever the display of the clock becomes dim and difficult to read. 1. Open the battery compartment cover as shown in the illustration. 2. Remove both of the old batteries. 3. Load two new batteries. Make sure that their positive (+) and negative (–) ends face in the correct directions
